Contact No. 07020814816 / 08087778631

Address: - G 17/8, Tarapur MIDC, Boisar West,  Palghar, Maharashtra India 401506

Stanrose® Clean Care Alkaline

Non-caustic water based alkaline cleaner, containing corrosion inhibitors to prevent the corrosion of metals such as zinc, aluminium, copper, brass and tin. "STANROSE® CLEAN CARE ALKALINE" minimizes the hazards in handling caustic based materials.

Common Name

Alkaline Safety Liquid

Product Code

STAN-CLC054

Features and Benefits

Non-caustic.
Non-flammable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Non-corrosive to ferrous metals
Suitable for all tank-coatings
Can be used for gas and hydrocarbon-freeing of tanks
Can be used for deodorizing
Safe, meets current regulation

Technical Properties

Form - Liquid
Appearance - Colourless
Density - 1.1
pH in Conc - 13
pH in 1% Sol - 11. 4
Non Compatible - The concentrated product may react with aluminium, zinc, tin and their alloys.

Recommended Uses

It minimizes the hazards in handling caustic based materials.

Method of Application

Cargo tank cleaning following discharge of drying, semi-drying and non drying natural oils and fats. As soon as possible after the cargo has been discharged, the tanks should be flushed with cold water to prevent polymerisation and evaporation of the lighter oil fractions.
Whenever possible, the cleaning solution should be heated to 60-80°C. However, the polymerising nature of some natural oils may demand lower cleaning temperatures.

Dosing Method
The most economical method of using "STANROSE® CLEAN CARE ALKALINE" is by direct injection followed by recirculation washing, using tank cleaning machines. If this method is not possible, hand spraying provides acceptable options. Refer to dosage table for dosage rates.
Cargo Residue | Hand Spray | Re-Circulation | Direct Injection | *Approx. re-circulation consumption, litres per 1000 m3 tank space
Fatty acids, fatty alcohols Fish oils | 100% | 3-5% | 2-4% | 180-300
Drying & Semi drying | 100% | 3-5% | 2-4% | 180-300
Vegetable oil | 50-100% | 2-4% | 1-3% | 120-240
Non drying vegetable oil | 50-100% | 2-4% | 1-3% | 120-240

*When using the re-circulation method, the tank to be cleaned is filled with water to a level that the heating coils are covered. As an average, this is approximately 0.6% of the volume of the tank. The figures mentioned in this column are the quantity of "STANROSE® CLEAN CARE ALKALINE" required to obtain the recommended solution strengths.

Storage and Handling

Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.

Packing Available

25 Ltr. / 210 Ltr.