Contact No. 07020814816 / 08087778631
Address: - G 17/8, Tarapur MIDC, Boisar West, Palghar, Maharashtra India 401506
The Stanrose® Electriclean, is an electric motor and machinery cleaner, designed to clean and degrease in-place running electric motors. It is a non-corrosive, no flash point, high dielectric strength and powerful cleaning solution capable of ridding dirt, grime, grease and oil off metal electric motor components, including precision parts, rollers, elevator shafts, control points, bearings, coils and rotors. Leaving no residue and containing no CFCs or trichloroethylene, the Stanrose® Electriclean is also clean and safe to use. Rigorously tested to ensure performance is up to mark, it is a handy tool suitable for use in places where electric machinery sees extensive use and the cleaning of electric components are vital to maintain smooth operation, such as manufacturing plants, printing plants, garages, automotive repair shops, office buildings, hospitals, restaurants, schools.
Electric Motor & Machinery Cleaner
Features and Benefits
Contains no CFC’s or Trichloroethylene
Leaves no residue
Excellent for degreasing electric motors
Flash Point >93°C (Seta Flash)
Water Content None
Dielectric Strength 20,000 Volts
Kauri-Butanol Value 122
Specific Gravity 1.55
Boiling Point 68C
Intermediate gears in water meters
Machines in non-food handling areas
Printing presses, rollers, blankets, offset type and mats
Elevator shafts and parts
Power generators, control points, end bells and bearings
Generators, starters and voltage regulators
Instrument parts, bearings and cases
Condensers and coils
Air condensing motors and equipment
Stator frames and rotors
Bottling plant machinery
• Machinery & motor in paper and lumber mills
• Marine deck machinery, motors and generators
Method of Application
POWERFUL CLEANING ACTION Penetrates, dissolves, and lifts out dirt, oil, grease and grime.
NO FLASH POINT Reduces fire-causing hazards around sources of ignition such as sparks and engine heat
NON-CORROSIVE TO MOST METALS Will not pit light alloys and plated finishes
HIGH DIELECTRIC STRENGTH OF 20,000 VOLTS Most equipment can be cleaned without time lost for disconnecting
QUICK EVAPORATION Can be use in areas that can’t be blown dry
REDUCES MOTOR BREAKDOWN AND CUTS ENERGY COST Reduces downtime and expensive repair costs. Motor runs cooler and uses less energy.
Storage and Handling
Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection.
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.