Contact No. 07020814816 / 08087778631
Address: - G 17/8, Tarapur MIDC, Boisar West, Palghar, Maharashtra India 401506
Stanrose® Fuel Care
Stanrose® Fuel Care is a fuel oil additive specifically designed to act as a water emulsifier and also to disperse and dissolve sludge in all types of fuel grades. This way, fuel blends gain a homogeneous nature while compatibility problems are reduced.
Fuel Oil Treatment
Features and Benefits
Disperses and dissolves sludge based hydrocarbons.
Breaks water emulsions resulting in the efficient separation from oil when centrifuged.
Prevents sludge formation and carbonaceous deposits.
Maintains homogeneity and stabilization of the fuel, this improves combustion.
Can be used as a degreasing agent when required.
Absolutely soluble in the fuel.
Has anticorrosive properties and is highly stable.
Cost effective, easy to handle and use.
Stanrose® Fuel Care is a liquid mixture of solvents,dispersants and emulsifying agents that results in a maximum performance of the treated fuel oil.
Appearance / Color : Clear, red liquid
Specific gravity : 0.87gr/cm3 at 20°C
Flash Point : >40°C
Odor : Strong Aromatic Solvent Odor
It act as a water emulsifier and also to disperse and dissolve sludge in all types of fuel grades.
Method of Application
A. Dosing Procedure The quantity suggested for fuel oil treatment is a proportion of 1 litre of Stanrose® Fuel Care for 4–8 cubic meters of fuel.
B. Feeding Procedure After the quantity of Stanrose® Fuel Care has been determined, it must be added to the main storage tanks before fuel loading or to the deep tanks through to the entire fuel system.
Storage and Handling
Refer technical data sheet.
Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water.
In case of contact with eyes, treat with large volumes of water and see a physician.
Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection.
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.