Search Results

Decorative Granular Flooring Multicolor Granular Decorative Epoxy Flooring Staroxy HPF-2500 is a 100% solid solvent free three component, self-levelling floor topping consisting pure liquid epoxy resins and specially graded aggregates cured with a modified cyclo-aliphatic amine curing agent. The system is supplied in pre-weighed packs, ready to mix and use, which provides a hard wearing, chemical resistant, impervious and easy to clean seamless flooring. Highlights Decorative floorings are dense, slip resistant textured finish that is easy to clean and maintain. Contains no solvent, allowing for interior application without harmful odors, excellent adhesive properties, Good physical & Chemical characters, No harmful odors. Impact Resistance Glossy Abrasion Resistance UV Resistance Topcoat - Staroxy HPF 2500 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat usually Staroxy HPF 2500 as per the instructions. Remove the perimeter tape and protect the floor from full traffic for 7 days. CLICK HERE TO DOWNLOAD TDS Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More

Stanrose® Oxycontrol-S Stanrose® Oxycontrol-S is an oxygen scavenger based on sodium sulphite blended with a specially selected catalyst which will effectively speed up the reaction of the sulphite with dissolved oxygen even at low temperatures. Stanrose® Oxycontrol-S is the ideal oxygen scavenger for all water tube boilers operating below 60 atmospheres(850 psi). Common Name Oxycontrol-S Product Code STAN-BWT150 Features and Benefits Feed solutions should be prepared with a minimum of stirring. This solution can be fed alone or in conjuction with other treatment chemicals not affected bob a reducing agent. Approx. fifty liters of "Stanrose® Oxycontrol-S" will be required to chemically react with one part of dissolved oxygen. , feed solutions should be made up fresh daily. Technical Properties For Dosage refer technical data sheet. Usage of Table : 1. Determine sulphite as ppm SO3 in boiler water by testing. 2. Find sulphite range in the table that contains the measured free sulphite residual ( ppm So3) 3. Read the ml of "Stanrose® Oxycontrol-S" needed per 1000 ltrs ( or per metric ton )under the appropriate pressure column. Recommended Uses Even with most modern deareation equipment, trace amounts of dissolved oxygen are found in the feed water. This dissolved oxygen will react with the boiler metal and the tubes to cause corrosion and subsequent failures. "Stanrose® Oxycontrol-S" was formulated to remove these minute traces of dissolved oxygen. The fast reaction rate of our special binded catalyst makes "Stanrose® Oxycontrol-S" particularly useful in systems where the boiler feed water temperatures are low or in cold water system. It is excellent in use in standby boilers for the prevention of standby corrosion. Method of Application Feed Requirements : Feed solutions should be prepared with a minimum of stirring. This solution can be fed alone or in conjuction with other treatment chemicals not affected bob a reducing agent. Approx. fifty liters of "Stanrose® Oxycontrol-S" will be required to chemically react with one part of dissolved oxygen. , feed solutions should be made up fresh daily. Feeding Method : "Stanrose® Oxycontrol-S" should be fed continuously for best results to the storage section of the deareator or to the make-up tank. This will ensure a residual in the feed water system as well as boiler at all times, even when make-up requirements are higher than normal. Diaphragm or piston type reciprocating positive displacement pump as well as bypass feeders may be used. A floating lid will help to prevent reaction with atmospheric oxygen. Feed systems chemical feed pumps for insoluble matter in the tank, outlet should be above bottom of tank and preferably equipped with fine screen strainer. Control : "Stanrose® Oxycontrol-S" is controlled by the sulphite test .A free residual of 30 to 60 ppm is normally maintained in the boiler water. A standard iodimetric titration is used for checking. These test units are available from your Stanrose service engineer. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Hand Cleaner - HD Stanrose® Hand Cleaner HD removes grease, grime, dirt, oil, wet paint, tar, soot, carbon and much more. Non-toxic and nonflammable, Simple Green® Heavy-Duty Hand Cleaner Gel can be used with salt water, fresh water or without any water at all. Common Name Heavy Duty Hand Cleaner Product Code STAN-CLC092 Features and Benefits It has a pleasant sassafras scent. Ideal for industrial, construction, maintenance and commercial applications and comes in several convenient sizes. Technical Properties Contains pumice for more cleaning power Use with or without water 0% volatile organic compound Non-toxic, non-flammable Recommended Uses Heavy-Duty Hand Cleaner Gel can be used with salt water, fresh water or without any water at all. It has a pleasant sassafras scent. Method of Application Available in a gel formula Contains pumice for additional scrubbing power Contains lanolin to moisturize and protect hands Works with or without water Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Seacare OSD-III Dispersants are chemicals that are applied directly to an oil slick. The key components of chemicals dispersants are surface active agents called Surfactants. Stanrose® Seacare OSD-III assists with breaking up the slick into small droplets ranging in size a few micrometers to few millimetres. Chemical dispersants can do this because they contain molecules that are both water compatible and oil compatible. The molecules align themselves around the oil droplets break away from the slick. The Action prevents the coalescence (reforming or joining) of oil droplets. So, the oil can no longer form slick on water surface, and it reduces the adherence of the oil to solid particles ( sand ) and hard surfaces ( sea walls & boat hulls )Chemical dispersants remove the oil from the surface of the water and into the water column. Once in the water column, the oil is diluted to less harmful levels, and eventually is used as a food by bacteria. By removing the oil from the water surface, birds, marine mammals and sensitive coast is protected. Common Name Oil Spill Dispersant, Type-III Product Code STAN-CLC060 Features and Benefits With the break up of the oil into water wetted droplets, the continuity of the fire is disrupted and it also stops any further spread of oil fire. The mixture of Stanrose® Seacare OSD-III and water is non flammable and non hazardous. Stanrose® Seacare OSD is free from Paraffinic Solvents / Polvaromatic and Aromatic Hydrocarbons, Chlorinated Hydrocarbons, Heavy Metals, Benzene, Phenols, Caustic Alkali and free Mineral Acid. Stanrose® Seacare OSD-III is duly tested by National Institute of Oceanography ( NIO, Goa ) Stanrose® Seacare OSD-III is Type III Water base dilutable concentrate which is non corrosive, non hydrocarbon, completely bio-degradable and practically non toxic in dilute form and slight toxic in concentrate form. It mixes well in sea and fresh water where maximum efficiency achieved at 1 : 10 DOR ( Dispersant to Oil Ratio ) in fresh and sea water and in concentrate as well as in dilute form. Stanrose® Seacare OSD-III is more efficient and stable in Diluted form indicating that DILUTION ( in Portable Water ) 1 : 10 ( 1 part of Concentrate & 10 parts of Portable Water ) does not make it less effective & dilutable concentrate increases the effective spraying time, So Stanrose® Seacare OSD-III is highly COST EFFECTIVE. Technical Properties Colour Golden Yellow transparent liquid Odour Free from offensive odor pH 7.2 + 0.5 Solubility in water Soluble in water Specific Gravity at 25°C + 1°C Pour Point - 5°C Conductivity 126.TDS./150 micromhos / cm Viscosity 111.08 cSt. Flash Point Material boils in the cup without flashing at 1000C Spreading coefficient 34 dy/cm2 Toxicity, LC50 Independent results available on request. Efficiency Independent results available onl request. Stability Independent results available on request. Shelf Life 5 years. Recommended Uses Refer technical data sheet Method of Application Refer technical data sheet Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Gum Remover “Stanrose® Gum Remover” is designed to soften and remove residues of chewing gum from floors, carpets, and upholstery. Rapidly lifts chewing gum from carpets and porous surfaces without the need for damaging freeze sprays Use as supplied Suitable for use on most carpets and upholstery within schools, hospitals, leisure complexes and other public areas Heavy duty performance even on old and trodden-in gum Citrus fragrance Common Name Chewing Gum Remover Product Code STAN-CLC108 Features and Benefits Viscous preparation allows precise application and prevents the need for reapplication Removes even the most stubborn gum residue Specialist solvents penetrate around and under the gum softening its bond to surfaces allowing it to be easily peeled. Easy peel prevents damage to the pile of carpets and upholstery. Contains emulsifiers to allow residues to be wiped away with water. No unsightly white marks. Citrus fragrance. Technical Properties APPEARANCE Viscous liquid COLOUR Colourless ODOUR Citus solvent. FLASH POINT (°C) - 4 closed cup SOLUBILITY Emulsifies in water RELATIVE DENSITY 0.72 Recommended Uses Ideal for the removal of chewing gum in all areas where this represents a problem for example in schools, leisure centres, hotels, busses and trains. Method of Application 1. When applying to fabric or carpets test an inconspicuous area first for colour fastness 2. Apply over and around the gum to allow it to penetrate underneath. 3. Allow to penetrate and soften the gum. 4. Peel away the gum with a scraper. 5. Wipe away residues with a damp cloth. Note : when removing gum from non-porous surfaces first score the surface of the gum to allow more rapid penetration. Do not apply to tarmac or asphalt. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Keep away from heat, sparks and open flame. Avoid inhalation of vapours. Packing Available 25 Ltr. / 210 Ltr. Download File

Epoxy Flooring Our Services Epoxy Flooring PU Flooring EPU Flooring ESD Flooring Decorative Flooring 3D Flooring Chemical Resistance Car Deck Flooring Repair Mortar We offer wide range of floor coating products and services such as Epoxy Flooring , PU Flooring , PU Concrete Flooring , EPU Flooring , ESD Flooring , Dielectric Flooring , Decorative Flooring , Nuclear Radiation Resistant Flooring , Chemical Resistance Flooring , Car Deck Flooring System , Repair Mortar , etc. We provide services pan India in Mumbai, Tarapur, Boisar, Palghar, Thane, Vasai, Andheri, MIDC, Navi Mumbai, Panvel, Vashi, Pune, Chakan, Hingana, Nagpur, Rau, Indore, Bamunimaidan, Guwahati, Assam, Rakhial, Ahmedabad, Dahej, Manjalpur, Vadodara, Delhi, Ernakulam, Kochi, Kerala, Bengaluru, Bangalore, Miyapur, Hyderabad, Madhya Pradesh, GIDC, Baddi, Himachal Pradesh, Tangra, Kolkata, West Bengal, Ambattur, Chennai, Tamilnadu etc. We provide lowest industrial epoxy flooring cost per square foot in India with best quality.

Epoxy Flooring Benefits Hygienic - It provides a jointless epoxy flooring making it dust free & easy to clean Chemical resistance - It has excellent chemical resistance to most chemicals Wear resistance - It provides a tough floor topping to withstand foot & light vehicular traffic Good abrasion resistance & good UV stability Where it is used? Staroxy (Epoxy) HG is recommended for use where extremely hygienic, abrasion, chemical resistant and dust free environment is required. It is ideally suited for flooring in following industries. Pharmaceutical Industries Electronic Assembly Areas Clean Rooms Food Processing Industries Scope Of Work Surface preparing by removing of dust, oil, grease, unwanted cements etc. through heavy duty grinding machine for exposing the micro pores on concrete. Filling of control joints, holes and uneven surface through epoxy mortar Applying of Staroxy Primer let it cure for 8 hrs. Application of Staroxy UL (Self Levelling Screed). Applying of Staroxy SL as per recommended thickness and let it cure for 36 hrs. (for optimum result) Surface Preparation Suitable methods are sanding or grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning. Use an industrial vacuum that picks up even small dust particles. The floor must be cleaned of all dusts and residues before starting to prime. Otherwise you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need. For thin cracks it may be necessary to slice them with a cutter before filling in order to improve the anchoring of the grout. Primer - Staroxy 103 MOT Mix Part A and Part B of Staroxy 103 MOT with Electric Stirrer. Once parts A & B have been thoroughly mixed, the product may be thinned to aid application. Apply the primer coat by brush and then roll the centre with a short nap roller. Allow a drying time of at least 4 hours before applying basecoat. If you intend to install epoxy corner coving, this should be done before commencing the next step. Click Here For List of Staroxy (EPOXY) Primers Basecoat - Staroxy UL 1000 The base coat used is usually Staroxy UL. Mix Part A and Part B of the Staroxy UL in a clean bucket with Electric Stirrer according to the instructions on the technical data sheet. Starting at the far corner, apply the basecoat by trowel and roller and evenly broadcast the Sand if necessary, into the wet product until all the basecoat is covered, except at the leading edge. Click Here For List of Staroxy (EPOXY) Underlay/Basecoat Topcoat - Staroxy SL 1000 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat usually Staroxy SL 1000 as per the instruction letter. Remove the perimeter tape and protect the floor from full traffic for 7 days. Click Here For List of Staroxy (EPOXY) Topcoats Roller Topcoat - Staroxy SL 300/500 Once ready to apply topcoat (waiting overnight for the basecoat to efficiently cure), mix Part A and Part B together. Refer to 'Mixing Section' of this product data sheet. Continue mixing throughout application. Be sure to roll one even coat of Staroxy SL 300 topcoat to entire surface to be coated. Click Here For List of Staroxy (EPOXY) Roll-on-Topcoats Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More

Privacy Policy Thank you for visiting Stanrose. This privacy policy tells you how we use personal information submitted or collected at this site with your consent. Please read this privacy policy before using the site or submitting any personal information. By using the site or the various features available and present herein, you are accepting the practices and the standard operating procedure as described in this privacy policy. These practices may be changed time to time as part of continuous change and applicability of new legal and statutory provisions which are binding upon us as a law abiding corporate citizen but any changes which could be undertaken by the Company shall be published and changes will only applicable to activities and information on a prospective basis, not retroactively. You are encouraged to review the privacy policy whenever you visit the site to make sure that you understand how any personal information you provide will be used. ​ Collection of information This notice applies to all information collected or submitted on our website. Stanrose collects or requests you to submit personal information, such as your e-mail address, name, home or work address or telephone number. Information collected by Stanrose.org by us is used only for the purpose of billing and shipping your online purchased purchases. We do not collect any information about your computer hardware, software or payment information. Neither we sell/disclose/share/distribute sensitive information to any 3rd party for any purpose except to extent of delivery of ordered products. ​ Use of the information We use the information that we collect from you to provide our services to you. In addition to this we may use the information for one or more of the following purposes: To provide information to you that you request from us relating to our products or services. To provide information to you relating to other products that may be of interest to you. Such additional information will only be provided where you have consented to receive such information and the same is existing with us at the time of utilization of the consent so provided by you. To inform you of any changes to our website, services or goods offered by various Vendors. If you have previously purchased goods or services from us we may provide to you details of similar goods or services, or other goods or services, that you may be interested in. We use return email addresses to answer the email and we don’t use the same for any other purpose. Legal distribution of information We may share information with Governmental Agencies or other companies assisting us in fraud prevention or investigation. We may do so when: (1) permitted or required by law; or, (2) trying to protect against or prevent actual or potential fraud or unauthorized transactions; or, (3) investigating fraud which has already taken place. ​ Information automatically collected when you visit website When you visit our websites, we automatically record information that your browser sends whenever you visit a website. For example, we may receive and collect: the name of the domain and host from which you access the Internet; the Internet Protocol (IP) address of the computer you are using; the date and time you access our websites; and the Internet address of the website from which you linked directly to our sites. We use this information to monitor the usage of our websites and as necessary for our business. This information does not include personal information. ​ Information collection using cookies Cookies Definition : Cookies are small text files that are placed on your computer or mobile device by websites that you visit. They cannot harm your computer and do not contain any information that enable us to identify you personally, they just enable our websites to recognize your computer and to identify certain other non-personal information such as which browser you are using. This information can be used to make the website work, to identify which parts of the site can work better or to analyse how often people visit the site and what they look at. We will not associate this data with any personally identifying information that you may choose to provide to us in other ways. By your using this website, we imply that you have read this policy and agree to us sending you cookies. Links to other website and products & social media Stanrose may provide you with the ability to register, log into, “like” or otherwise interact with third party social media services, including, but not limited to, Facebook, Instagram, Twitter, Pinterest, YouTube, and other social media services. These features may enable integration and/or access to your social media accounts. We do not control these social media services or your profiles on these services, and we do not establish privacy settings or rules for how your personal information on these services will be used. If you choose to log on to or submit information through any of these social media services, your personal information will be subject to the applicable social media service’s terms and conditions and your current privacy settings on such social media service. By accessing any social media service, you will be assuming the risk that the personal information you provide on that service may be viewed and/or used by third parties for any purpose. You agree that Stanrose not responsible for any acts or omissions by these social media service providers. In addition, by choosing to log in to our Sites using your credentials from a social media service, you are asking that service to send us certain information from your account with the service, and you authorize us to collect, store and use such information in accordance with this Privacy Policy. ​ Query / Questions If You Have any Query / Questions then Mail us on Following mail ID in any of English / Hindi Language. admin@stanrose.co.in

EPU Flooring Highlights Advantages Intended Use Heavy Duty Epoxy Polyurethane Based Screed Tolerates Oil Contamination Flexible than epoxy High strength Recommended on oil contaminated surface Self-leveling property High flexural & compressive strengths Engineering Garages Manufacturing units Warehouses requiring tolerance to oil contamination Topcoat - Staroxen SL 1000 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat usually Staroxen SL 1000 as per the instruction liter. Remove the perimeter tape and protect the floor from full traffic for 7 days. Click Here For List of Staroxen (EPU) Topcoats Roller Topcoat - Staroxen SL 300 Once ready to apply topcoat (waiting overnight for the basecoat to efficiently cure), mix Part A and Part B together. Refer to 'Mixing Section' of this product data sheet. Continue mixing throughout application. Be sure to roll one even coat of Staroxy SL 300 topcoat to entire surface to be coated. Click Here For List of Staroxen (EPU) Roller Topcoats Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More

Stanrose® Biostan Oil Cleaner "Stanrose® Biostan Oil Cleaner" is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegetable oils, fish oils, tall oils, tug oils etc .It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents, Biodegradable minimizes the extreme hazards to personnel in handling materials. Common Name CTC Volc Cleaner Product Code STAN-CLC069 Features and Benefits Removes grease, oil, carbon deposits, soil and grime. Keeps loosened deposits in suspension preventing re-deposition. Low toxic. , Non-flammable. Free from hydrocarbon solvents. Effective and economical in use , Water-based cleaner. Technical Properties Appearance Slightly Yellow Viscous Ordour Characterisric Density 1.00 at 20°C Flash Point None pH 7 at 20°C pH Neat None on Cement, Ceramic Tiles, Vinyl or Metal Surfaces Recommended Uses It is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegetable oils, fish oils, tall oils, tug oils etc Method of Application First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using "Stanrose® Biostan Oil Cleaner" is by direct injection followed by re-circulation washing, using tank cleaning machines. Spraying Method : Using "Stanrose® Biostan Oil Cleaner" as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry. **Make sure to take all safety precautions are followed when handling / spraying "Stanrose® Biostan Oil Cleaner"** Injection Method : Not applicable. Re- Circulation Method : Fill tank with fresh water and heat up to warm 50o C . If a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and "Stanrose® Biostan Oil Cleaner" to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. **Use a strainer at the pump stack when circulating any solution.** Tank Lining– Stainless / Epoxy / Phenolic. Dosage : Necessary concentration in water only 0,2 to 0,4 % Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Dual Purpose Stanrose® Dual Purpose is a specially formulated blend of organic dispersing agents, water displacing surfactants and combustion catalysts. This product is designed to meet two objectives: 1. Improve the precombustion characteristics of light and heavy fuels. 2. Introduce combustion catalysts into the combustion zone to improve combustion efficiency and minimize fireside corrosion and deposit problems. Common Name Dual Purpose Plus /Concentrated Combustion Improver Product Code STAN-FOT190 Features and Benefits Stanrose® Dual Purpose reduces fuel consumption and pollutant emissions. Stanrose® Dual Purpose improves the quality of fuel. Stanrose® Dual Purpose removes the existing deposits and keeps the injector nozzles clean. Stanrose® Dual Purpose protects the system from corrosion. Stanrose® Dual Purpose minimizes the Sludge formation. Stanrose® Dual Purpose reduces maintenance costs. Technical Properties Appearance : Dark Brown Liquid Specific Gravity 20°C : 0.87 Flash Point PMCC : Above 66°C / 150°F Viscosity : 60 sec at 400 by Redwood viscometer no. 1 Recommended Uses FUEL CONDITIONER Stanrose® Dual Purpose will reduce sludge and gum formation in tanks, feed lines, oil pre-heaters, strainers and burners. Sludging potential of oil is greatly increased by the presence of water. Stanrose® Dual Purpose contains an emulsion breaker which separates the water from the oil. This separation will also reduce some serious fireside slags. The sodium ion in saltwater if carried into the combustion chamber will reduce the melting point of vanadium forming a molten slag. COMBUSTION CATALYST Stanrose® Dual Purpose contains combustion catalysts which function by providing the fastest possible reaction time of the air fuel mixture assuring that complete combustion is achieved in the shortest time possible. This results in the minimization of soot, fly ash, intermediate combustion products and unburned particulate matter. Stanrose® Dual Purpose will prevent Low Temperature Corrosion by allowing minimum excess air conditions to be approached as a result of improved combustion reactions and by eliminating the catalytic effect that produces sulphur trioxide. Stanrose® Dual Purpose further protects against low temperature corrosion by preventing acidic deposits of particulate matter. By way of review, sulphur dioxide and sulphur trioxide are normal combustion products when firing fuels containing sulphur. The concentration of sulphur trioxide in the flue gas in relation to sulphur dioxide is dependant on the excess air employed and the presence of vanadium and iron oxide. It has been estimated that 75% of the sulphur trioxide is formed from sulphur dioxide in the combustion area. The reaction occurs as a result of sulphur dioxide combining with nascent oxygen and is aided by the catalytic effect of vanadium and iron oxide. Sulphur trioxide concentration in the flue gas determines the acid dew point. Acid dew point is defined as that temperature at which the water vapour present in the flue gas as a result of combustion can combine with sulphur trioxide to form sulphuric acid. Low temperature corrosion results when the flue gas cools below the acid dew point. This condition is found in pre-heaters, economizers, cold end of boilers and in the stack. This problem is particularly severe when maximum heat recovery from the flue gas is desired. AIR POLLUTION Stanrose® Dual Purpose will reduce air pollution by minimizing the amount of undesirable constituents in stack gases. Burning of fuel containing sulphur will result in the formation of sulphur dioxide and sulphur trioxide trioxide. The use of Stanrose® Dual Purpose and good combustion controls will retain most of the sulphur in the dioxide from and minimize the formation of the highly undesirable sulphur. Unburned residues and fly ash are also minimized in the stack gas because of the improved combustion reaction. This results in the maintaining of a clean stack and the reduction of undesirable particulate matter. The complete burning of the fuel will also eliminate the unwanted products of partial combustion such as aldehydes and ketones. Method of Application Average dosage rates are one litre per 2 to 4 tons of fuel, Apply directly to tanks when bunkering, normally down the souding tube. If sludge breaking is not a problem in the double bottoms apply directly to day tank or for more accurate control we recommend that Stanrose® Dual Purpose be metered directly into the fuel supply line. The best way is to start on a Diesel Engine, which has just completed overhaul. On such an engine, one can see the difference by checking following and comparing with the period when "Stanrose® Dual Purpose" was not being used. 1. Fuel Oil Filters condition / time between cleaning. 2. Fuel Injectors condition / time between overhauls. 3. Exhaust from the Engine - colour/ Extent. 4. Piston Rings Breakage if any caused due to unburned fuel and heavy carbon deposits. 5. Time between overhaul of Inlet / Exhaust Values. 6. Time between Piston overhaul. 7. Burning of Piston Heads. 8. Corrosion, if any, on components such as liner. 9. Presence of carbon in crank case oil caused by blow past due to sticky /broken Piston Rings. Since, complete combustion means full utilization of the calorific value of the fuel, there is a definite saving in specific Fuel consumption, when above conditions are maintained. Storage and Handling Avoid contact with skin and eyes. In case of contact flush with plenty of water. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File