top of page
Contact No. 07020814816 / 08087778631
Email sale@stanrose.co.in

Address: - G 17/8, Tarapur MIDC, Boisar West,  Palghar, Maharashtra India 401506

  • STAROXY NPE CRC 90
    Description: - Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required. Advantages: - Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents Can be applied in cool damp conditions Can be re-coated in 4 to 6 hours Can be applied in occupied facilities Forms a virtual moisture barrier 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements Technical Properties: - Color: RAL shades Solids Content: 100% Gloss 60 F: 100 Mix Ratio: 2.1-A to 0.9-B by weight Pot Life: 20 minutes @ 75 F VOC: 0% Foot Traffic: 10-12 hours Recoat - Minimum: 4 - 12 hours (Depending on Temperature) Recoat - Maximum: 24-36 hours (Depending on Temperature) Service: 5 days Mechanical Properties: - Tensile Strength ASTM-D-638: 10,400 p.s.i Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure Hardness ASTM-D-2240: 86 Shore D Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat Elongation: 2.5%
  • STAROXY CRC 90
    Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio: 2.5-A : 1.5-B By Weight Viscosity (mixed): 1800 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 6-8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: Black, White, & standard colors Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+
  • STAROXY CRC 80
    Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio 2.5-A : 1.5-B By Weight Viscosity (mixed): 2000 to 2500 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 4 to 8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: 15 Colors + Special Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+

Air Cooler Cleaner Plus

Description

A powerful micro fluid, specifically developed for the removal of heavy grease, tar and grime from machinery, floors, walls and many other hard surfaces including engines and gearboxes of road vehicles. Extensively used as a solvent replacement for ink removal. Also suitable for pressure washing all vehicles, agricultural equipment and industrial plant machinery. Being a combination of quality solvents and powerful surfactants ACC Plus offers the benefits of a solvent product with the health and safety considerations of detergents. Its unique properties remove encrusted salt from bodywork and painted surfaces whilst also eliminating any tar spots, insects and bird lime leaving the surface clean and streak free.

​

Benefits
  • Effective at high dilution
  • Easily removes ink, grease, oil dirt and grime
  • Does not contain ingredients which accelerate metal corrosion
  • Safe on glass, rubber and plastic surfaces
  • Ideal for hot or cold pressure wash machines
  • Effective in hard and soft waters
  • Contains odorless safety solvent

​

Applications

  • Plant/Machinery

  • Engine/Gearbox Cleaning

​

Dosage / User Instructions

  • Aquamarine Carbon Remover combined Air Cooler Cleaner is suitable for all types of diesel engine.

  • The cleaner/fresh water mixture has no flash point and cylinder lubrication is not impaired.

  • The following table shows our recommendation for initial dosage per air cooler.

  • This is based on one injection every 24 hours.

  • This can be varied based on performance of the pressure drops across the air coolers.

bottom of page