Description

Staroxy Epocrete is a three-component solvent free epoxy aggregate floor repairing system. When cures it does not shrink and gives a tough layer. It has excellent bonding to old and new concretes. It is Epoxy Mortar for RCC membranes & floor repairs and Tile.

Features: -

• Easily applied as a universal repair mortar in all industries. Has excellent load bearing, abrasion resistance and chemical resistance properties.

• Has excellent load bearing, abrasion resistance and chemical resistance properties

• Can also be used for small repairs of floors

• Gives a non-slip surface

• Excellent early strength, hence floor can be used quickly resistance and chemical resistance.

Recommended Uses: -

For repair in chemical industry, heavy industry, ramps, loading and unloading bays, paint shops, battery rooms, food processing plants etc.

Technical Properties: -

• Mixed Density: 1.78 kg/L

• Surface Finish: Matt, Semi Matt

• Pot Life: 45 minutes at 30º C (For 25 kg of mixed material)

• Foot Traffic Time: 24hrs. after application

• Full Cure: 7 Days

• Compressive Strength (EN13892-2): 50 N / mm2 at 7 days

• Tensile Strength (BS6319 Part 7): 8 N / mm2 at 7 days

• Flexural Strength (EN13892-2): 18 N / mm2 at 7 days

Please download TDS and MSDS by clicking on image below for application and safety instructions.

Description: -

Starocrackfill a two components 100% solids epoxy crack filler designed for shallow repair on either vertical or horizontal surfaces. This product is easy to mix and use. Additionally, because the product is a 100% solids formulation, it can be applied thicker on horizontal surfaces when required.

Features: -

Due to its low viscosity, easily flows and seeps into small cracks to effectively seal them off from damage and degradation.

• Highly resistant to most acids, alkali, salts and other chemicals.

• Becomes a permanent part of the concrete and provides tenacious holding power for long-term protection.

Uses: -

Suitable for interior or exterior application to concrete bridge decks and concrete floors. May also be used as an excellent anchor for setting bolts during machinery installations.

Technical Data: -

• Color: Clear

• Viscosity: < 65 KU

• Pot life (70°F): 25-30 minutes

• Knoop Hardness: > 5000 psi

• Elongation (@ 28 days): 20%-30%

• Flexural Strength: Reinhart beam

• Compressive Strength: 15,000 psi

• VOC Content: 0 g/l

• A.I.M. Category: Floor Coatings

• Maximum VOC 400 g/l

Please download TDS and MSDS by clicking on image below for application and safety instructions.

Description: -

Starocrackseal is a two-component, low-viscosity, 100% solids, epoxy repair product designed for injection into cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Color will be clear to light yellow. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).

Features: -

• High-strength - stronger than concrete

• Low-viscosity - easy to inject and flows well into small cracks

• Moisture tolerant and blocks moisture

• Fits standard caulking tube

• No mess - self mixing

Recommended Uses: -

• Horizontal repairs

• Interior and exterior

• Stops air and water leaks

• Secures railings, bolts, and rebar

• Repairs foundation cracks

• Sets injection ports

Technical Data: -

• Color: Clear, light yellow

• Solids (%): 100

• Compressive strength (ASTM D695): 11,000 psi (75.8 MPa)

Please download TDS and MSDS by clicking on image below for application and safety instructions.

Description

Epoxy Tile Grout is a three-component system based on specially formulated epoxy resins and hardeners, especially for use in applications of ceramic tile, vitrified tile and stone.

Features: -

• Fast setting

• Very good strength properties

• Negligible shrinkage

• Stain and Solvent free

• Ease of installation

Recommended Uses: -

It is an ideal material recommended for, Shopping malls & Showrooms, Hotels, Kitchens & Bathrooms

Swimming pools, Residential and commercial buildings etc.

Technical data: -

• Colour: As per customer requirement

• Pot life @ 27°C in minutes: 90 – 120

• Foot traffic: 24 hrs.

• Heavy traffic: 72 hrs.

• Density, grams/cc: 2 – 2.1

• Full curing time, in day, min: 7

• Comp strength, kg/sq.cm, min: 700

• Adhesion strength, kg/sq.cm, min: 30 (concrete failure)

• Tensile strength, kg/sq.cm, min: 100

• Shrinkage: Negligible

Please download TDS and MSDS by clicking on image below for application and safety instructions.