Contact No. 07020814816 / 08087778631              Email: sale@stanrose.co.in / info@stanrose.co.in              Address: G 17/8, Tarapur MIDC, Boisar West, 401506

Chemical Resistant Flooring

Highlights

  • It is a high performance two component polyurethane system with very low VOC an 57% volume solid.

  • It is a high performance two component polyurethane system with very low VOC an 57% volume solid.

  • It is having very high gloss and having compatibility with a huge range of primers and intermediates.

  • Wonderful finish and having high resistant to UV and chemical attacks.

  • Hard wearing - extremely durable and abrasion resistant with low maintenance cost.

  • Facilitates rapid application

  • Independently tested - suitable for use in food and drinks production environments.

Sealer Coat - Staroxy

 

CRC/Novolac Topcoats

  • Once ready to apply topcoat (waiting overnight for the basecoat to efficiently cure), mix Part A and Part B together. Refer to 'Mixing Section' of this product data sheet.   Continue mixing throughout application. Be sure to roll one even coat of Staroxy CRC / Novolac Sealer coat to entire surface to be coated.

STAROXY CRC/NOVOLAC TOPCOATS

STAROXY NPE CRC 90


Description: -

Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas.

Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required.

Advantages: -

  • Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents
  • Can be applied in cool damp conditions
  • Can be re-coated in 4 to 6 hours
  • Can be applied in occupied facilities
  • Forms a virtual moisture barrier
  • 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements

Technical Properties: -

  • Color: RAL shades

  • Solids Content: 100%

  • Gloss 60 F: 100

  • Mix Ratio: 2.1-A to 0.9-B by weight

  • Pot Life: 20 minutes @ 75 F

  • VOC: 0%

  • Foot Traffic: 10-12 hours

  • Recoat - Minimum: 4 - 12 hours (Depending on Temperature)

  • Recoat - Maximum: 24-36 hours (Depending on Temperature)

  • Service: 5 days

Mechanical Properties: -

  • Tensile Strength ASTM-D-638: 10,400 p.s.i

  • Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure

  • Hardness ASTM-D-2240: 86 Shore D

  • Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost

  • Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat

  • Elongation: 2.5%




STAROXY CRC 90


Description: -

Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications.

Advantages: -

  • Excellent chemical resistance
  • Strong yet resilient
  • Built in flexibility
  • Sprayable

Technical Properties: -

  • Mix Ratio: 2.5-A : 1.5-B By Weight

  • Viscosity (mixed): 1800 CPS

  • Pot Life (200 gr.): 40 minutes

  • Tack Free to Touch: 6-8 Hours

  • Initial Cure: 24 Hours

  • Final Cure: 7 Days

  • Packaging (unit size): 3 ltr. 15 ltr.

  • Standard Colors: Black, White, & standard colors

Mechanical Properties: -

  • Tensile Strength (ASTM D-638): 5500 p.s.i. min.

  • Elongation: 5%+




STAROXY CRC 80


Description: -

Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications.

Advantages: -

  • Excellent chemical resistance
  • Strong yet resilient
  • Built in flexibility
  • Sprayable

Technical Properties: -

  • Mix Ratio 2.5-A : 1.5-B By Weight

  • Viscosity (mixed): 2000 to 2500 CPS

  • Pot Life (200 gr.): 40 minutes

  • Tack Free to Touch: 4 to 8 Hours

  • Initial Cure: 24 Hours

  • Final Cure: 7 Days

  • Packaging (unit size): 3 ltr. 15 ltr.

  • Standard Colors: 15 Colors + Special

Mechanical Properties: -

  • Tensile Strength (ASTM D-638): 5500 p.s.i. min.

  • Elongation: 5%+





Follow Us On
  • Facebook Stanrose Boisar Palghar  India
  • Instagram Stanrose Boisar Palghar Mumbai Maharashtra India
  • YouTube Stanrose Boisar Palghar Mumbai Maharashtra India
  • Twitter Stanrose Boisar Palghar Mumbai Maharashtra India
  • LinkedIn Stanrose Boisar Palghar Mumbai Maharashtra India
Get a quote: 070-20-814-816
Find Us On
  • indiamart-com-branch-office--rohini-sect
  • trade-india-boisar-stanrose-floor-coatin
  • stanrose-on-justdial-pu-flooring-epoxy-f
  • trust-seal-indiamart-stanrose-boisar-flo
Quick Links
Address

G 17/8, Tarapur MIDC, Opp. Lalit Hotel,

Boisar West Palghar 401506 Maharashtra India

Contact Details
info@stanrose.co.in / sale@stanrose.co.in
Tel: 808-777-86-31 / 702-081-48-16