COntact No. 07020814816 / 08087778631              Email: sale@stanrose.co.in / info@stanrose.co.in              Address: G 17/8, Tarapur MIDC, Boisar West, 401506

EPU Flooring

STAROXEN (EPU) SL & ROLL-ON-TOPCOATS

STAROXEN SL 1000


Description

Three component, solvent free, flexible, self levelling EPU (epoxy- polyurethane) flooring

Features: -

  • Self levelling coatings with excellent flow & levelling characteristics

  • Conforms to the Global Migration Standards laid down in US-FDA: 21CFR 175-300

  • Very high abrasion, impact and mar resistance

  • Excellent flexibility and tensile strength

  • Resistance to aggressive corrosive environment

  • Excellent inter-coat adhesion over aged/ old epoxy coatings

Technical Properties: -

  • Recommended DFT / Coat 1 – 2 mm

  • Theoretical Covering Capacity 0.32 Sq.Mtr /kg @ 2 mm DFT (0.5 Sq.Mtr/ litre) 0.64 Sq.Mtr /kg @ 1 mm DFT (1.0 Sq.Mtr/ litre)

  • Drying Time Surface Dry: 6 hours

  • Hard Dry: 24 hours

  • Full Cure: 7 days

  • Mixing Ratio (by weight) Base : Hardener : Aggregate (Base to aggregate ratio would vary with shade) 36.5 : 16.5 : 47.0

  • Pot life :30 minutes

Mechanical Properties: -

  • Compressive Strength (ASTM C 579) 72 MPa

  • Flexural Strength (ASTM C 580) 32 MPa

  • Tensile Strength (ASTM C 307) 18 Mpa

For application and safety instructions download TDS and MSDS.

Click Here to Download TDS




STAROXEN RCI GLOSS 500


Description

Starothane RCI Gloss is a three-component solvent free EPU coating. It is a high-performance product. It is a self-smoothing, easy to apply product, leaving a seamless surface with glossy finish. It has excellent chemical, abrasion and impact resistance. If enhanced slip resistance is required Staroxy Anti-Skid can be used in the system. To be used as finish coat in atmospheric environments. Can be applied directly on approved primers depending on the conditions of the concrete substrate.

Features:

  • High flexibility

  • Provides a hard wearing, chemical & abrasion resistant top coat

  • Excellent flow and levelling characteristics giving self levelled finish

  • High gloss

  • Excellent adhesion over primed surface

  • Conforms to the Global Migration Standards laid down in US-FDA: 21CFR 175-300

  • Solvent free; no odour during application

  • Easy to clean and maintain

  • Finds application in pharma, food, breweries, automobile, chemical and light engineering industries

Technical Properties:

  • Generic Type: Hybrid EPU based

  • Volume Solids: 62% - 66%

  • Ratio: Pre weighted pack of 23 Kg

  • Covering Capacity: 1.4 m2 per kg for 0.5 mm thickness

  • Coverage: 32 Sq. Mtr. For 0.5 mm thickness

  • Dry Time:

To Touch – 8 Hrs.

To Recoat – 14 Hrs.

Foot Traffic – 14 Hrs.

Full Cure – 7 Days

  • Pot Life: 30 Minutes

Mechanical Properties:

  • Volume Solids (ASTM D 2697): 100%

  • Flexural Strength: 40 N/mm2

  • Tensile Strength: 20 N/mm2

  • Bond Strength: Greater than cohesive strength of quality

For Application Instructions and Storage Condition requirements please download TDS.

Click Here to Download TDS




STAROXEN RCI MATT 500


Description

Starothane RCI Gloss is a three-component solvent free EPU coating. It is a high-performance product. It is a self-smoothing, easy to apply product, leaving a seamless surface with matt finish. It has excellent chemical, abrasion and impact resistance. If enhanced slip resistance is required Staroxy Anti-Skid can be used in the system. To be used as finish coat in atmospheric environments. Can be applied directly on approved primers depending on the conditions of the concrete substrate.

Features:

  • High flexibility

  • Provides a hard wearing, chemical & abrasion resistant top coat

  • Excellent flow and levelling characteristics giving self levelled finish

  • Matt finish.

  • Excellent adhesion over primed surface

  • Conforms to the Global Migration Standards laid down in US-FDA: 21CFR 175-300

  • Solvent free; no odour during application

  • Easy to clean and maintain

  • Finds application in pharma, food, breweries, automobile, chemical and light engineering industries

Technical Properties:

  • Generic Type: Hybrid EPU based

  • Volume Solids: 62% - 66%

  • Ratio: Pre weighted pack of 23 Kg

  • Covering Capacity: 1.4 m2 per kg for 0.5 mm thickness

  • Coverage: 32 Sq. Mtr. For 0.5 mm thickness

  • Dry Time:

To Touch – 8 Hrs.

To Recoat – 14 Hrs.

Foot Traffic – 14 Hrs.

Full Cure – 7 Days

  • Pot Life: 30 Minutes

Mechanical Properties:

  • Volume Solids (ASTM D 2697): 100%

  • Flexural Strength: 40 N/mm2

  • Tensile Strength: 20 N/mm2

  • Bond Strength: Greater than cohesive strength of quality

For Application Instructions and Storage Condition requirements please download TDS.

Click Here to Download TDS





Follow Us On
  • Facebook Stanrose Boisar Palghar  India
  • Instagram Stanrose Boisar Palghar Mumbai Maharashtra India
  • YouTube Stanrose Boisar Palghar Mumbai Maharashtra India
  • Twitter Stanrose Boisar Palghar Mumbai Maharashtra India
  • LinkedIn Stanrose Boisar Palghar Mumbai Maharashtra India
Get a quote: 070-20-814-816
Find Us On
  • indiamart-com-branch-office--rohini-sect
  • trade-india-boisar-stanrose-floor-coatin
  • stanrose-on-justdial-pu-flooring-epoxy-f
  • trust-seal-indiamart-stanrose-boisar-flo
Quick Links
Address

G 17/8, Tarapur MIDC, Opp. Lalit Hotel,

Boisar West Palghar 401506 Maharashtra India

Contact Details
info@stanrose.co.in / sale@stanrose.co.in
Tel: 808-777-86-31 / 702-081-48-16