
Epoxy Roll-on-Topcoats
Description
This is a three-component amine cured solvent free epoxy coating. It is a high-performance product. It is a self-smoothing, easy to apply product, leaving a seamless surface. It has excellent chemical, abrasion and impact resistance. If enhanced slip resistance is required Staroxy Anti-Skid can be used in the system. To be used as finish coat in atmospheric environments. Can be applied directly on approved primers depending on the conditions of the concrete substrate.
Features:
Provides a hard wearing, chemical & abrasion resistant top coat
Excellent flow and levelling characteristics giving self levelled finish
High gloss
Excellent adhesion over primed surface
Conforms to the Global Migration Standards laid down in US-FDA: 21CFR 175-300
Solvent free; no odour during application
Easy to clean and maintain
Finds application in pharma, food, breweries, automobile, chemical and light engineering industries
Technical Properties:
Generic Type: Amine based Epoxy
Volume Solids: 62% - 66%
Ratio: Pre weighted pack of 23 Kg
Covering Capacity: 1.4 m2 per kg for 0.5 mm thickness
Coverage: 32 Sq. Mtr. For 0.5 mm thickness
Dry Time:
To Touch – 8 Hrs.
To Recoat – 14 Hrs.
Foot Traffic – 14 Hrs.
Full Cure – 7 Days
Pot Life: 30 Minutes
Mechanical Properties:
Volume Solids (ASTM D 2697): 100%
Flexural Strength: 40 N/mm2
Tensile Strength: 20 N/mm2
Bond Strength: Greater than cohesive strength of quality
For Application Instructions and Storage Condition requirements please download TDS.
Click Here to download TDS
Description
Staroxy RCI 300 G is a pigmented, solvent-free, high build epoxy floor coating system designed to offer seamless, durable floor protection at applied thicknesses 0.3 mm.
With the addition of Staroxy Anti-skid system (slip resistant aggregates) between coats, anti-slip resistant applications can be achieved in system buildup thicknesses between 0.50 to 2.0mm. Available in as a 3-part component kit. Staroxy exhibits excellent wear, abrasion and chemical resistance and is suitable for use in a wide variety of industrial and commercial applications. It can be used to provide a surface coating with a high gloss hygienic finish or a slip resistant coating system.
Advantages of the above systems are: -
Excellent wear and abrasion resistance.
Superior chemical resistance.
Smooth high gloss finish for hygienic applications.
Slip resistant finish in trafficable applications.
Easy application by brush, roller or squeegee.
Technical Properties:
Generic Type: Amine based Epoxy
Volume Solids: 62% - 66%
Ratio: Pre weighted pack of 23 Kg
Covering Capacity: 1.6 m2 per kg for 0.3 mm thickness
Coverage: 32 Sq. Mtr. For 0.3 mm thickness
Dry Time:
To Touch – 8 Hrs.
To Recoat – 14 Hrs.
Foot Traffic – 14 Hrs.
Full Cure – 7 Days
Pot Life: 30 Minutes
Mechanical Properties:
Volume Solids (ASTM D 2697): 100%
Flexural Strength: 40 N/mm2
Tensile Strength: 20 N/mm2
Bond Strength: Greater than cohesive strength of quality
For Application Instructions and Storage Condition requirements please download TDS.
Click Here to download TDS

