Stanrose® Chlorine Tab
Stanrose® Chlorinating Tablet is a dry organic chlorine in tablet form giving a high available chlorine base, ensuring an effective sterilising and disinfecting action in slow release form. 200g tablet with 90-92% available chlorine. For chlorination of swimming pools, sewage and waste water.Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For waste water treatment, fill the chlorinating pipes until 2 to 5 PPM of residual active chlorine are obtained. If below 2 PPM, use both chlorinating pipes.
Features and Benefits
Purification of Drinking Water.
Treatment for Sewage.
Appearance Tablet Form
UN No. 2468
Active chlorine % ≥ 90.0
Chemical Formula C 3 O 3 N 3 CL 3
Moisture% ≤ 0.5
Molecular Weight 232.41
PH (1% solution) 2.7-3.3
Molecular formula 143.0
Store Store in cool, dry, well ventilated area.
Melting Point 235
Treatment for Swimming Pool.
Method of Application
The tablet is dosed to the water supply tank preferably suspended away from the fabric of the tank. The tablets should not be allowed to rest on the bottom of metal tanks. Being in tablet form this is a safer method of administering chlorine than the usual liquid preparations. When used as part of a planned programme of protection it will assist in control of problems associated with such areas as bacterial and organic fouling including legionnaires disease.
Dose Rate: Rates will be determined by the extent of current problems. An initial dose will be required to give a free residual chlorine reserve of 5-50ppm for a minimum of 1 hour. Thereafter a reserve of 0.5-2.0ppm is normally sufficient. Also available as rapid dissolving 1 tablet will give 50ppm chlorine in 3.6m3 water.
Storage and Handling
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.