top of page
StanroseĀ® Coolant
It is a blend of organic compound along with 3 to 15% benzotriazole is especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life.
Common Name
Coolant
Product Code
STAN-CLC084
Features and Benefits
Protection against cavitation and corrosion
Technical Properties
Appearance - Clear Liquid
Density - 1.096 g/cm3
Product pH - neat 9.5
Corrosive Action - None
Recommended Uses
At concentration of 10% by volume, "StanroseĀ® Coolant" affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.
Method of Application
The "STAN-2000-018" should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water, mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits:
Water hardness : 0 - 100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.
Storage and Handling
Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection.
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.
Packing Available
25 Ltr. / 210 Ltr.
bottom of page