Stanrose® Hard Cleaner - MP

Stanrose®Hard Cleaner - MP is a versatile concentrated industrial strength surfactant and hard surface cleaner. This product has no free caustic, it relies on the non-ionic, anionic and inorganic detergents to emulsify and rinse clean on all surfaces.
The specially selected wetting agents ensure rapid penetration of surface grime layers.

Common Name

Hard Surface Cleaner – Multi Purpose

Product Code

STAN-CLC113

Features and Benefits

No fumes or added perfumes
Can be used as “spray‐on, wipe‐off”
Safe on aluminium
Biodegradable
Safe in Septic systems

Technical Properties

Refer technical data sheet

Recommended Uses

This product has no free caustic, it relies on the non-ionic, anionic and inorganic detergents to emulsify and rinse clean on all surfaces.

Method of Application

General Manual Cleaning: Dilute 40: 1 with potable water (25ml per Litre)
If the surface is covered with dirt's, fat, grease or oil specially in tiled or floor areas, a dilution of 20:1 (50ml per Litre) is recommended.
Hard Job Cleaner may be used in urinal troughs, toilet bowls, along shower benches and hand basins. Dilute 10:1 in a squirt bottle, scrub then flush with clean water.
Hard Job Cleaner will also clean surfaces contaminated with water based paints or inks. To remove lipstick tar, gum or hard to remove stains, apply straight form the bottle. Hard Job Cleaner may also be used as a surface cleaner for trucks, cars, annexes and trailers.

Storage and Handling

Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water.
In case of contact with eyes, treat with large volumes of water and see a physician.
Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection.
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
Store at moderate temperatures in dry, well-ventilated area.

Packing Available

25 Ltr. / 210 Ltr.