Search Results

Stanrose® Hand Cleaner - HD Stanrose® Hand Cleaner HD removes grease, grime, dirt, oil, wet paint, tar, soot, carbon and much more. Non-toxic and nonflammable, Simple Green® Heavy-Duty Hand Cleaner Gel can be used with salt water, fresh water or without any water at all. Common Name Heavy Duty Hand Cleaner Product Code STAN-CLC092 Features and Benefits It has a pleasant sassafras scent. Ideal for industrial, construction, maintenance and commercial applications and comes in several convenient sizes. Technical Properties Contains pumice for more cleaning power Use with or without water 0% volatile organic compound Non-toxic, non-flammable Recommended Uses Heavy-Duty Hand Cleaner Gel can be used with salt water, fresh water or without any water at all. It has a pleasant sassafras scent. Method of Application Available in a gel formula Contains pumice for additional scrubbing power Contains lanolin to moisturize and protect hands Works with or without water Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Fuel Demulsion Stanrose® Fuel Demulsification is the breaking of a crude oil emulsion into oil and water phases. Common Name Fuel Emulsion Breaker Product Code STAN-FOT191 Features and Benefits From a process point of view, the oil producer is interested in three aspects of fuel demulsification : Rate or the speed at which this separation takes place Amount of water left in the crude oil after separation Quality of separated water for disposal Technical Properties Stanrose® Fuel Demulsification is an aid to the physical removal of water from all grades of fuel. Recommended Uses Stanrose® Fuel Demulsification improves centrifugal separation of fines, it helps prevent sludge formation and stabilises fuel viscosity. The fuel filters and lines will be cleaner with less inclination towards blockage. The main purpose of Stanrose® Fuel Demulsification is however to rapidly split water in oil emulsions. Method of Application Breaks water-in-oil emulsions by lowering the surface tension between the two phases. It is insoluble in water and remains effective even after the water has been removed. Powerful dispersants combat existing sludge formations while homogenizing the fuel to prevent new sludge from being formed. Stanrose® Fuel Demulsification lowers the surface tension between the oil and water phases in an emulsion. It is completely insoluble in water and remains in the fuel oil phase. It also disperses sludges and any heavy particles into thefuel oil. Dosing Instructions: Stanrose® Fuel Demulsification is dosed to the bunker tank prior or during bunkering. Dosing is based on water content using test results. If none are available an initial dose of 1:4000 should be used. Water % Vol 0.5 – 1.0 1.0 – 2.00 >2.0 Dose Rate 1: 4000 1 : 2000 1 : 1000 Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

OUR MISSION Our company mission is to understand customer’s need & provide true, commercial-grade floor coating systems to have the same durable, professional quality floor coating at a fraction of the cost. Our goal is to provide you with the proper solutions with unerring quality & cost competency by adopting complete honesty & dignity in all our dealings. OUR TEAM We possess a sincere and dedicated team of professionals who play a vital role in the growth of our organization. Our team is full of trained members who are capable of understanding the different requirements of clients in an effective manner. We have procured agents, applicators, quality controllers, warehouse & packaging personnel and sales & marketing personnel. Our professionals work in close coordination with each other to attain 100% client satisfaction. With their vast domain knowledge and experience, we are able to offer appropriate products to our customers. Besides, our professionals also undertake and accomplish waterproofing, wall coating and flooring works with utmost perfection. QUALITY STANDARDS Being a trusted organization, we pay utmost attention on quality factor. All our sourced range is rigidly tested by our quality controllers in order to ensure flawless products to our coveted customers. The company is accredited with EN ISO 9001: 2015 quality management system certification and EN ISO 14001: 2015 environment management system certification for its ability to design and develop solutions /products coupled with a good manufacturing practices / service. Our construction chemical products for Epoxy Flooring, PU Paints and Coatings, Epoxy Primers, Solvented and Solventfree Coatings, Nuclear Radiation Resistant Coating, Heat Reflector and Waterproofing Coatings follow approvals by recognized bodies such as Central Food Technological Research Institute - CFTRI, Counsil of Scientific and Industrial Research - CSIR, Central Power Research Institute - CPRI, National Test House - NTH, Electrical Research and Development Association - ERDA, Veermata Jijabai Technical Institute - VJTI, Board of Radiation and Isotope Technology - BRIT, Nuclear Power Corporation of India - NPCIL, ISOMED as per industry standards

Stanrose® Hard Cleaner - MP Stanrose®Hard Cleaner - MP is a versatile concentrated industrial strength surfactant and hard surface cleaner. This product has no free caustic, it relies on the non-ionic, anionic and inorganic detergents to emulsify and rinse clean on all surfaces. The specially selected wetting agents ensure rapid penetration of surface grime layers. Common Name Hard Surface Cleaner – Multi Purpose Product Code STAN-CLC113 Features and Benefits No fumes or added perfumes Can be used as “spray‐on, wipe‐off” Safe on aluminium Biodegradable Safe in Septic systems Technical Properties Refer technical data sheet Recommended Uses This product has no free caustic, it relies on the non-ionic, anionic and inorganic detergents to emulsify and rinse clean on all surfaces. Method of Application General Manual Cleaning: Dilute 40: 1 with potable water (25ml per Litre) If the surface is covered with dirt's, fat, grease or oil specially in tiled or floor areas, a dilution of 20:1 (50ml per Litre) is recommended. Hard Job Cleaner may be used in urinal troughs, toilet bowls, along shower benches and hand basins. Dilute 10:1 in a squirt bottle, scrub then flush with clean water. Hard Job Cleaner will also clean surfaces contaminated with water based paints or inks. To remove lipstick tar, gum or hard to remove stains, apply straight form the bottle. Hard Job Cleaner may also be used as a surface cleaner for trucks, cars, annexes and trailers. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Bank Details To Deposit Amount to Akshardhara's account. ​ Account Name - Stanrose Envirotech India Pvt Ltd ​ Bank Name - HDFC BANK LTD Branch - Boisar ​ Bank Address - B Wing, 1st Floor, Shivkala Arcade, Boisar Tarapur Road, Boisar- 401501 IFSC Code - HDFC0000160 Account No - 50200040596199 Account Type - Current A/c Once you deposit bill amount send sms/whatsapp to +917620600130 in following format [Your name, Deposited Amount, Date, Time; | For Example, Sameer, Rs. 200/-, 01/10/2017, 04:20 (approx)] or mail at admin@stanrose.co.in in same format or call on 7620600130 | 8655730738 (10 am to 7 pm)

Interior Paints Highlights Interior paint is more to do with aesthetics and decoration purposes and at the same time, they need to add properties of easy maintenance, wash ability and dampness prevention. It’s designed to withstand abrasion. Interior paint is also designed to be more delicate than exterior paint because they occupy the same space as you do. Interior paint is so made that they can be scrubbed and can resist staining. Interior paint is formulated to be more resistant to physical damage. The resins used for interior paint can be firmer because the paint does not have to deal with weather and temperature differences like exterior paint. Interior paint is not required to be fade resistant as they are not subject to extreme temperature conditions and hence do not fade easily. Interior paints need to be stained resistant for hiding brush and roller marks. Interior paint should get cured even without direct exposure to sunlight. Interior paint does not require additives like pesticides and fungicides. It is made washable so as to clean spots and marks that they accidentally get especially by small kids and pets at home. Interior paint should have a low or zero VOC (Volatile organic compounds). This is important in preserving the air quality in your home. Low or zero VOC help to reduce your health risks. Our products have been tested and approved by trusted authorities such as CFTRI, CSIR, VJTI. STAROXY NPE CRC 90 Description: - Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required. Advantages: - Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents Can be applied in cool damp conditions Can be re-coated in 4 to 6 hours Can be applied in occupied facilities Forms a virtual moisture barrier 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements Technical Properties: - Color: RAL shades Solids Content: 100% Gloss 60 F: 100 Mix Ratio: 2.1-A to 0.9-B by weight Pot Life: 20 minutes @ 75 F VOC: 0% Foot Traffic: 10-12 hours Recoat - Minimum: 4 - 12 hours (Depending on Temperature) Recoat - Maximum: 24-36 hours (Depending on Temperature) Service: 5 days Mechanical Properties: - Tensile Strength ASTM-D-638: 10,400 p.s.i Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure Hardness ASTM-D-2240: 86 Shore D Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat Elongation: 2.5% STAROXY CRC 90 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio: 2.5-A : 1.5-B By Weight Viscosity (mixed): 1800 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 6-8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: Black, White, & standard colors Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+ STAROXY CRC 80 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio 2.5-A : 1.5-B By Weight Viscosity (mixed): 2000 to 2500 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 4 to 8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: 15 Colors + Special Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+

Pigments STAROXY NPE CRC 90 Description: - Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required. Advantages: - Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents Can be applied in cool damp conditions Can be re-coated in 4 to 6 hours Can be applied in occupied facilities Forms a virtual moisture barrier 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements Technical Properties: - Color: RAL shades Solids Content: 100% Gloss 60 F: 100 Mix Ratio: 2.1-A to 0.9-B by weight Pot Life: 20 minutes @ 75 F VOC: 0% Foot Traffic: 10-12 hours Recoat - Minimum: 4 - 12 hours (Depending on Temperature) Recoat - Maximum: 24-36 hours (Depending on Temperature) Service: 5 days Mechanical Properties: - Tensile Strength ASTM-D-638: 10,400 p.s.i Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure Hardness ASTM-D-2240: 86 Shore D Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat Elongation: 2.5% STAROXY CRC 90 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio: 2.5-A : 1.5-B By Weight Viscosity (mixed): 1800 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 6-8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: Black, White, & standard colors Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+ STAROXY CRC 80 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio 2.5-A : 1.5-B By Weight Viscosity (mixed): 2000 to 2500 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 4 to 8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: 15 Colors + Special Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+

Stanrose® DI Water Stanrose® DI Water is simply water that has had most of the mineral content and dissolved ion content removed. It is pure water. The cleanliness of the water is rated as its resistance value. [Pure water will not conduct electricity][The rating is in Meg Ohms. Microsiemmens or Conductivity is also used as a measurement of DI water Standard tap water is brought to a temperature of about 72 degrees f and run though a pre filter system consisting of a 25 micron sediment filter, 25 micron carbon filter and either a water softener filter or a chloramines filter [depending on your particular water quality and your local government treatment method] and then the main DI system consisting .5-micron filter to remove particulates, a carbon filter then removes any organics within the water. A reverse osmosis filter removes further contaminants and a mixed bed resin filter removes the final dissolved minerals. This is a very basic process for production of DI water on a small scale. Larger systems are very complicated and use pumps and re- circulation loops to provide larger volumes of DI water. Common Name Deionized Water Product Code STAN-SSC211 Features and Benefits Types of DI Water Stanrose® DI Water is classified into several types dependent on its use. If you are cleaning high end semiconductor final cleaning of optics or high end medical devices, then type 1 is the correct choice. Type II DI water is also used for high end cleaning and for food grade products. Type III is commonly used for parts cleaning and general lab ware cleaning. The charts below give the specifications for the various types of DI water. Technical Properties Maximum Contaminant Levels in Type I-III Purified Water As mentioned in technical data sheet Recommended Uses 1. Deionized water can be used to process pharmaceuticals, make shampoo, reduce blow down, reduce scaling or comply to a standard. 2. Deionized water can be used in food and beverage processing quality. 3. Use Deionized water to pretreat boiler feed water to reduce scaling and energy use. 4. Deioniozed water can pretreat cooling tower make-up water to reduce scaling and energy use. 5. Deionized water can be used to increase the efficiency of car washes, powder coat paint lines, the purity of manufacturing water and more. Method of Application Stanrose® DI Water is classified into several types dependent on its use. Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

PU Concrete Flooring Advantages From laying the Starocrete to daily use, regular cleaning and maintenance, there are many advantages for processors and ultimately users of this building material. Here are some advantages of polyurethane concrete in an overview: The short curing time makes it ideal for quick conversions and extensions Chemical-resistant makes it suitable for use in laboratories, practices and workshops PU concrete is impact-resistant, shockproof and resistant to scratches, abrasion and holes. Can be used in many facilities due to temperature resistance from -40°C to 130°C Easy to clean and disinfect Non-slip and can be used according to standards such as DIN 51130 or BGR 181 Recommended Uses Starocrete (PU concrete) is used in many branches of industry, not only in industry, but also in many smaller-scale trades. The positive characteristics, the easy cleaning with achievement of important standards and the longevity are important factors. Here are some examples of the use of PU concrete / polyurethane concrete: Chemical industrial equipment Pharmaceutical industry Research, practices and laboratories Foodstuffs industry e.g. butchery and bakery also wine press and brewery and Cheese and Dairy Surface Preparation Suitable methods are sanding or grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning. Use an industrial vacuum that picks up even small dust particles. The floor must be cleaned of all dusts and residues before starting to prime. Otherwise you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need. For thin cracks it may be necessary to slice them with a cutter before filling in order to improve the anchoring of the grout. Basecoat - Starocrete 1000 Scratchcoat The scratch coat used is usually Starocrete 1000 Scratch coat. Mix Part A and Part B of the Scratchcoat in a clean bucket with Electric Stirrer according to the instructions on the technical data sheet. Starting at the far corner, apply the basecoat by trowel and roller and evenly broadcast the Sand for firm grip with topcoat, into the wet product until all the basecoat is covered, except at the leading edge. DOWNLOAD TDS Topcoat - Starocrete TC 2000 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat Starocrete TC 2000 as per the instruction liter. Apply the topcoat by trowel and spike roller. Use the trowel with thickness of 2 mm to get approx. coverage and after that remove the perimeter tape and protect the floor from full traffic for 7 days. DOWNLOAD TDS Topcoat - Starocrete TC 3000 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat Starocrete TC 3000 as per the instruction liter. Apply the topcoat by trowel and spike roller. Use the trowel with thickness of 3 mm to get approx. coverage and after that remove the perimeter tape and protect the floor from full traffic for 7 days. DOWNLOAD TDS Topcoat - Starocrete TC 6000 It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat Starocrete TC 6000 as per the instruction liter. Apply the topcoat by trowel and spike roller. Use the trowel with thickness of 6 mm to get approx. coverage and after that remove the perimeter tape and protect the floor from full traffic for 7 days. DOWNLOAD TDS Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More

Repair Mortar STAROXY NPE CRC 90 Description: - Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required. Advantages: - Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents Can be applied in cool damp conditions Can be re-coated in 4 to 6 hours Can be applied in occupied facilities Forms a virtual moisture barrier 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements Technical Properties: - Color: RAL shades Solids Content: 100% Gloss 60 F: 100 Mix Ratio: 2.1-A to 0.9-B by weight Pot Life: 20 minutes @ 75 F VOC: 0% Foot Traffic: 10-12 hours Recoat - Minimum: 4 - 12 hours (Depending on Temperature) Recoat - Maximum: 24-36 hours (Depending on Temperature) Service: 5 days Mechanical Properties: - Tensile Strength ASTM-D-638: 10,400 p.s.i Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure Hardness ASTM-D-2240: 86 Shore D Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat Elongation: 2.5% STAROXY CRC 90 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio: 2.5-A : 1.5-B By Weight Viscosity (mixed): 1800 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 6-8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: Black, White, & standard colors Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+ STAROXY CRC 80 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio 2.5-A : 1.5-B By Weight Viscosity (mixed): 2000 to 2500 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 4 to 8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: 15 Colors + Special Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+

Primer STAROXY NPE CRC 90 Description: - Staroxy NPE CRC 90 is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. Novolac Epoxy - Highly Chemical Resistant Epoxy - is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. It is commonly used as a seal coat for Epoxy Mortar Systems where chemical resistant performance is required. Advantages: - Exhibits excellent resistance to strong acids, alkalis, and most industrial chemicals and solvents Can be applied in cool damp conditions Can be re-coated in 4 to 6 hours Can be applied in occupied facilities Forms a virtual moisture barrier 100% solids - 0.0 lbs VOC - meets even the most strict low VOC requirements Technical Properties: - Color: RAL shades Solids Content: 100% Gloss 60 F: 100 Mix Ratio: 2.1-A to 0.9-B by weight Pot Life: 20 minutes @ 75 F VOC: 0% Foot Traffic: 10-12 hours Recoat - Minimum: 4 - 12 hours (Depending on Temperature) Recoat - Maximum: 24-36 hours (Depending on Temperature) Service: 5 days Mechanical Properties: - Tensile Strength ASTM-D-638: 10,400 p.s.i Adhesion to concrete ACI Committee 403: 300 p.s.i - 100% concrete failure Hardness ASTM-D-2240: 86 Shore D Abrasion Resistance ASTM-C-501: CS-17 Wheel 30 mg lost Service Temperature MIL- D-3134F: Up to 180-325 degrees F. Dry Heat Elongation: 2.5% STAROXY CRC 90 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio: 2.5-A : 1.5-B By Weight Viscosity (mixed): 1800 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 6-8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: Black, White, & standard colors Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+ STAROXY CRC 80 Description: - Staroxy CRC 90 is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkaline for both interior and exterior applications. Advantages: - Excellent chemical resistance Strong yet resilient Built in flexibility Sprayable Technical Properties: - Mix Ratio 2.5-A : 1.5-B By Weight Viscosity (mixed): 2000 to 2500 CPS Pot Life (200 gr.): 40 minutes Tack Free to Touch: 4 to 8 Hours Initial Cure: 24 Hours Final Cure: 7 Days Packaging (unit size): 3 ltr. 15 ltr. Standard Colors: 15 Colors + Special Mechanical Properties: - Tensile Strength (ASTM D-638): 5500 p.s.i. min. Elongation: 5%+

3D Epoxy Flooring Epoxy Terrazo Flooring TERRAZZO is a highly decorative flooring system that combines pigmented polymer modified concrete with marble, colored glass, granite, or other approved aggregates and is trowel applied at 8mm to 18mm nominal thickness and polished to expose a beautiful matrix of resin and aggregates. Terrazzo provides outstanding durability and wear resistance resulting in the lowest life cycle cost of any flooring system available. Advantages Extensive color selection allows for unlimited design variations Colors will not fade or wear thin Chemical and stain resistant High wear, impact and abrasion resistance Rapid cure and finishing time Less weight than marble, granite Low odour during application and cure, can be applied in occupied buildings Low maintenance. more suitable for multi-story buildings Resists bacteria and fungal growth Lowest life-cycle cost decorative flooring Low odour for use in occupied areas Scope Of Work Terrazzo floors method can be divided in two phases, first one is laying and second is Polishing, first step covers start to finish of laying including floor preparation, primer, Divider strip installation, fibre isolation if needed to prevent substrate crack to go thru the terrazzo and laying of PMC Terrazzo. Second phase covers Grinding, polishing, Grouting and sealer to achieve the minimum abrasion resistant and non – penetrating stain surface. Here is the detailed description of throughout process. Phase 1 - Laying Terrazzo Surface Assesment Surface Preparation Primer / Isolation Membrane Divider Strip Installation Laying of Terrazzo Phase 2 - Grindng, Polishing, Sealing and Burnishing Grinding Grout Polishing Sealer Burnishing Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More