Search Results

Return, Refund and Exchange Policy Return Policy Payment and Returns Stanrose accepts return as per the following policy Only the products found defective/damaged will be accepted for returns/refunds. Customer need to raise an alert with us within 2 working days from the date of delivery for being eligible for the return. Only those products will be eligible for return policies which are received by us within 10 working days of the date of delivery. Stanrose retains the rights to examine whether the products returned is defective/damaged and based on the verification Stanrose will either reship/replace the Products to the customer. In case products is defective or damaged then the Stanrose will replace and reship the books/products to the same shipping address of the customer subject to the availability of the stock of the products. In case the returned products is not defective/damaged then the customer will be informed about the same and the same products will be reship to the shipping address of the order. Customer will have to bear the shipment charges for the replaced/reshipped products. If the products stock is unavailable then a request for the refund will be initiated and the same shall be informed to the customer through registered email. ​ Refund, Exchange Policy Stanrose refund policies are as following Only those products which are returned from the customers as per the acceptable return policy and for which the replacement is not possible will be eligible for refunds. In the event that a product is listed at an incorrect price or with incorrect information due to an error in pricing or products information, Stanrose may, at its discretion, either contact the customer for instructions or cancel the order and notify customer of such cancellation. In such cases Stanrose will refund the charged amount to the customer (only for which the payment is already received). For Online Refund, i n case the payment mode of the refunded order is Online (Credit Card/Net Banking) the amount will be refunded to the customer Card Account. Refund will be done within 2 working days from the date of request of refund. Contact If You Have any Query / Questions about Return, Refund, Exchange Policy then Mail us on Following mail ID in any of English / Hindi Language. admin@stanrose.co.in

Contact Us Thanks for submitting! Submit G 17/8, Tarapur M.I.D.C., Boisar, Maharashtra 401506, India Epoxy PU Concrete EPU ESD Anti Static Dissipative Conductive EPU Polyurethane Industrial Glossy Abrasion Resistant Flooring Paint Waterproofing Products Chemicals Supplier Contractor Applicator Manufacturer Flexible Anti Corrosion Coating Car Deck Parking Pharmaceutical Electronics IT Call us at +917620600130 for assistance

Stanrose® Degreaser HD Stanrose® Degresol HD is a versatile heavy duty degreaser meant for tough industrial cleaning jobs. It emulsifies greasy, oily soil for easy and complete removal. A special low foam formulation makes this water based cleaner / degreaser ideal for use in automatic floor scrubbing machines. It eliminates costly work stoppages due to foam build-up in the recovery tank. This product is economical and versatile. Its varied dilution ratios enable use in a wide range of applications, from heavy duty degreasing to general purpose cleaning. When used in pressure sprayers, it generates cleaning power without over abundant suds. Common Name Heavy Duty Degreaser Product Code STAN-CLC070 Features and Benefits Non-butyl emulsifier is concentrated for fast action in the toughest oily and greasy soils. Emulsifies oily soils on industrial equipment, parts, soak tanks, tools and engines. Excellent for food service filters, fans, vent hoods, grills, ovens and other surfaces. General cleaner for floors and counters. Technical Properties Physical State: Liquid Colour: Clear Fragrance: None Foaming: Low Free Rinsing: Yes Petroleum Distillates: None Viscosity: Thin Phosphates: None Biodegradable: Yes pH (undiluted): 12.8 Recommended Uses Prepare dilution based on the amount and type of soil to be cleaned. Apply to floor, allow to work, and agitate with mop or brush, pick up and rinse if needed. Method of Application Heavy Soil: 1:16 to 1:8 (8-16 ounces of per gal. of water) Normal Soil: 1:32 to 1:16 (4-8 ounces of per gal. of water) Light Soil: 1:64 to 1:32 (2-4 ounces of per gal. of water) Pressure Cleaning Equipment: Use 2nd SHIFT in the equipment in accordance with the equipment manufacturer's instructions. Adjust use dilution strength for optimum cleaning. Rinse with hot or cold clean water. Floor Cleaning: Add 2nd SHIFT to the cleaning solution tank after filling it with water. Adjust use dilution strength to optimize cleaning results and efficiency. Mopping Equipment: Dilute between 1:50 and 1:5 (2-25 ounces per gallon of water) Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® One Shot BWT Stanrose® One Shot BWT is a well-balanced blend of boiler water treatment chemicals designed to protect low pressure auxiliary and fire tube boilers against scale and corrosion. It is liquid compound containing alkaline mineral salts, sequestering agents, scale and corrosion inhibitors and sludge conditioners. Common Name One Shot Product Code STAN-BWT146 Features and Benefits “Stanrose® One Shot BWT ” is designed to achieve the maximum degree of boiler protection with a minimum of chemical testing and feed procedures. The system is designed to meet the operating conditions for the low pressure steam generator not requiring the more sophisticated testing and feed procedures. Technical Properties Form Liquid Appearance Clear Solution Sp. Gravity 1.1 Flash Point None pH Value 13.5 “Stanrose® One Shot BWT ” incorporates all water treatment chemicals in one liquid formulation that can be fed directly from the drum. Recommended Uses Oxygen Scavenger : To chemically react with dissolved oxygen there by preventing oxygen" pitting" corrosion. Synthetic Polymers and Alkalinity Control Agents : To chemically react with scale forming minerals forming a nonadherent sludge easily removed by blowdown. These materials also protect against the adherence of oily deposits introduced by oil contamination. Defamer: A defoamer has been incorporated into the formulation to help in the production of clean steam and to prevent the problems associated with the carryover of solids into steam traps and valve. Method of Application Dosage : “Stanrose® One Shot BWT ” can be fed neat to the boiler or can be diluted to any convenient strength. The treatment can be shot fed to any convenient point in the feed water circuit. As a guideline to establishing control on an untreated boiler, feed 2 litres or 4 pints of treatment per ton of boiler water. Adjust feed from then on in accordance with the periodic alkalinity test procedure. If 'p' Alkalinity is above 400ppm decrease treatment. Test Procedure : “Stanrose® One Shot BWT ” consists of two easy to use portable kits. One to record 'P' Alkalinity which indicates that sufficient treatment has been added and one to record Chlorides to control blowdown. Blowdown : Blowdown the low pressure steam generator one a day. For optimum control over boiler water solids if conditions such as high feed water solids or make-up water requirements are encountered. Handling : “Stanrose® One Shot BWT ” contains alkaline materials and care should be taken avoid contact with skin and eyes. In case of contact, immediately flush skin and eyes with plenty of water for 15 mts. Get medical attention. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxycontrol-H When operating modern boiler facilities even under ideal conditions, trace quantities of oxygen are left in the feed water despite mechanical de-aeration. Common Name Oxycontrol-H Product Code STAN-BWT149 Features and Benefits "Stanrose® Oxycontrol-H" is a liquid and easy to feed. It will convert ferric oxide to a protective film of magnetic. Single colourimeteric control test. It doesn't contribute dissolved solids to the boiler water. Reduced blow-down costs. Makes iron oxide sludge non adherent by completely changing its composition. Technical Properties Feed solutions should be prepared with a minimum of stirring. Approx. 6.5 parts of "Stanrose® Oxycontrol-H" are required to chemically react with one part of dissolved oxygen. When using "Stanrose® Oxycontrol-H" in a system for the first time, dosage requirements will be much higher due to the consumption of "Stanrose® Oxycontrol-H" by the ferric oxide present. Because of the reaction of "Stanrose® Oxycontrol-H" with air, feed solutions should be made up fresh daily. Recommended Uses "Stanrose® Oxycontrol-H" will chemically react with active oxygen to form inactive gases of nitrogen and water. Additionally "Stanrose® Oxycontrol-H" passivates metal surfaces through the formation of protective oxide films thereby minimizing iron and copper deposits in the boiler. Method of Application "Stanrose® Oxycontrol-H" should be fed continuously for best results. A positive displacement pump should be used to feed "Stanrose® Oxycontrol-H" into feed water after the deareator. Continuos feed to this area will supply continuos corrosion protection to the feed water control. "Stanrose® Oxycontrol-H" is controlled by checking the feed hydrazine residual in the boiler water. The recommended range is 0.1 - 0.2ppm. Control testing is a simple colourimeteric cooperator which is available from Stanrose. Storage and Handling Avoid contact with skin and eyes. Avoid breathing vapour. See separate Safety Data Sheet available on request for more information. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. "Stanrose® Oxycontrol-H" is harmful if swallowed. Skin contact and vapour inhalation should be avoided. Protective equipment should be worn when handling "Stanrose® Oxycontrol-H". "Stanrose® Oxycontrol-H" does not have a flash or fire point and does not represent a fire hazard. Direct contact and storage in high temperature areas should be avoided. Keep container closed when not in use. Do not store near acids or oxidising agent. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Vaptreat Stanrose® Vaptreat is a concentrated liquid blend of polymer and antifoam agents for controlling scale and foam in evaporators. Stanrose® Vaptreat is Approved by the Norwegian National Institute of Public Health for application in evaporator systems that are used to produce potable water. Common Name Vapour Treatment Product Code STAN-SSC209 Features and Benefits Stanrose® Vaptreat prevents scale by crystal distortion, dispersion, and absorption of scale forming minerals. Crystal distortion As soluble minerals are forced out of solution during evaporation hey go through an intermediate crystal stage before forming dense deposits. Stanrose® Vaptreat reacts with the crystals causing them to be distorted and irregularly shaped. The distorted crystals do not form dense and uniform deposits which would adhere to evaporator surfaces. Ensures that the evaporator works at maximum efficiency by keeping heat transfer surfaces free of scale The antifoaming properties ensure that distillate quality is high as carry over is eliminated Will gradually remove existing scale when dosed at twice the normal rate Concentrated, safe liquid, easy and economical dosing Technical Properties Appearance pale yellow liquid Flash Point none PH of 1% solution 9.2 Specific Gravity 1.09 Recommended Uses Stanrose® Vaptreat should be fed continuously to the evaporator inlet line. Stanrose® Vaptreat can be diluted with fresh water and the feed solution introduced with an eductor or an positive displacement metering ppm. Method of Application The specially selected polymers in Stanrose® Vaptreat combined with the potential scale forming salts in the brine to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and removed with the evaporator brine. The operating efficiency of the plant is maintained for maximum water production. The intervals between cleaning are greatly increased. The product to use for acid cleaning is Stanrose® Descaler, which will remove old scale prior to treatment with Stanrose® Vaptreat . Evaporators have a tendency to produce foam while operating - the de-foaming properties of Stanrose® Vaptreat will stop this foaming and carry-over will be eliminated. Distilled water quality is maintained. Dosing Method The standard dosage, applicable to the majority of systems, is 15-30 ml of Stanrose® Vaptreat per ton of distillate produced. This is based on the rated production capacity of the evaporator. Example: In a 25 ton/day evaporator. Treatment used = 25 x 30 ml = 750 ml of Stanrose® Vaptreat per day. Setting the Flow Rate The treatment is added to the dosage tank and mixed with water. Example: With the 0.75 litres of Stanrose® Vaptreat add sufficient water to make up 50 litres of liquid. Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting This will last 24 hours. A metering pump can also be supplied for use with Stanrose® Vaptreat if required. N.B. The brine density should not exceed 1.038 g/cm3. The scaling potential increases rapidly over this level. An increase in the amount of Stanrose® Vaptreat used will assist in retaining potential scale forming salts in suspension. For example: If the density rises to 1.050 g/cm3 the dosage should be 60 ml/ton of rated capacity. Dosage : The recommended dosage rate for Stanrose® Vaptreat is 5 to 10 ppm based on type, usage and operating conditions of the evaporator. Your Stanrose® service engineer will readily guide you on the correct dosage. It is preferred that the evaporator be clean and free of deposits before Stanrose® Vaptreat is introduced . Stanrose® Vaptreat will clean up moderate amount of existing deposits. Double the dosage rates previously recommended during the clean up period. Storage and Handling No special precautions required. Use the same care as in handling other chemicals used for maintenance. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

PU Roller Coating PU Roller Coating Starothane RCI / RCE i.e., Roller Coating for Internal / External, is used where following parameters should be taken care of, which are: - Economic compared to other self-leveling surface coating solutions Good wear and abrasion resistance Good chemical resistance Easy cleaning Colored Advantages of Starothane RCI / RCE: - Easy to apply with no restrictions compared to a standard epoxy application Flexibility in the system build up to serve individual requirements Very low odour Topcoat - Starothane RCI ​ Gloss/Matt It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat Resin and Hardner of Starothane RCI as per the ratio 3:1. Apply the topcoat by roller. Remove the perimeter tape and protect the floor from full traffic for 7 days. The Product is available in Gloss and Matt finish depending upon the customer requirement. Starothane RCI is used for surface coating for interior application. DOWNLOAD TDS for GLOSS DOWNLOAD TDS for MATT Topcoat - Starothane RCE ​ Gloss/Matt Starothane RCE has Ultraviolet rays stability due to which it can be used for exterior application purposes as well as for interior application also. Starothane RCE is also available in Gloss or Matt finish. It is important to select a suitable topcoat which will meet all the visual and wearing requirements. Mix the topcoat Resin and Hardner of Starothane RCI as per the ratio 3:1. Apply the topcoat by roller. Remove the perimeter tape and protect the floor from full traffic for 7 days. The Product is available in Gloss and Matt finish depending upon the customer requirement. DOWNLOAD TDS for GLOSS DOWNLOAD TDS for MATT Other Useful Products Coving & Yellow Lining Material Staroxy 20 SF – Sand Coving Aggregates – Sand, Silica Powder, Talc Powder Staroxy 21 WB – Water base Coving Stancrete 33 PU – PU base Coving Stanrocove 25 – Covefinish Staroxy 22 – Epoxy Coving Paint Starothane 23 – PU Coving Paint Starothane Yellow/White – PU Yellow Lining Paint Staroxy Yellow/White – Epoxy Yellow Lining Paint Read More Pigments Epoxy Pigments PU & EPU Pigments Resinous Concrete Pigments Read More Repair Mortar Starocrackfill – Crack Fill Material Starocrackseal – Crack Seal Material Staroxy Epocrete – Epoxy Mortar Repair Read More

Stanrose® Anti-Fouling Stanrose® Anti-Fouling is a very effective clear , yellowish green with anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of cooling systems. Due to its molecular firm foaming properties, it also acts as a corrosion inhibitor. Common Name Fouling Preventing Liquid Product Code STAN-CLC120 Features and Benefits Antifouling Liquid reduces the risk of Legionella Pneumophilla bacteria by effectively removing biofilms in the water supply system. When used in sterilizers and autoclaves, the reagent provides clean and shiny surfaces near the loaded glass containers, by emulsifying fats, oils, proteins and other organic residues. Effectively control micro-organism growth. Economical , reduce down time cost , also doesn't require any special monitoring. Also control biological corrosion. Technical Properties Appearance - Clear or slightly turbid aqueous solution Colorless or slightly yellow in color Density (kg / m 3 ) - 1020 pH - 8.5 - 12.5 Flash Point - None Freezing Point - <+ 2 0 C Solubility in Water - Cpmpletely soluble in water Recommended Uses It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of micro-organism, bacteria , fungi , larvae etc. The best point of feeding is as early as possible in the system , preferably at the suction point of strainer , this will helps dispersion of solution in all parts of the sea water cooling system. Method of Application For sea water cooling systems - Dose 150 – 500 ML of Stanrose® Anti-Fouling for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally the treatment is not required when sailing deep sea. For ballast tanks - Dose 1 litre of Stanrose® Anti-Fouling per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons. For Trim Tanks, Oil Rig Sea Legs and Similar Systems - Dose 25 litres of Stanrose® Anti-Fouling per 100 tons of water. General Testing for bacteria can be done with our Stanrose® Dip Slide Method ( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination. Note: 1 . Strictly avoid to contamination / use in any food area / farming purpose 2 . It is strongly recommended to clean entire fouled contaminated system prior to its use. 3. It should be diluted with fresh water. 4. Causes eye and skin irritation, workers must wear all chemical resistant apron and face mask, long pants, shoes. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Carpet Shampoo Stanrose® Carpet Shampoo is a clear light green liquid that quickly and easily eliminates stains and malodors wherever they occur. It settles into fabrics depositing its minuscule encapsulating molecules that absorb unpleasant odours trapped in carpets, rugs and upholstery and also deposit its odour encapsulating blend that eliminates bad odours; the biodegradable surfactants and solvents present in Stanrose® Carpet Shampoo then cleans and pick up all soil and dirt for a perfect cleaning job. This product can be used on any fabric, however test an inconspicuous area before to make sure there is no change in appearance. Common Name Carpet Shampoo Product Code ​ Features and Benefits No odours, Non Acid, Non Alkaline Counteracts surface odours Can be used as pre-spotter cleaner Use on carpets, upholstery, rugs and fabrics Concentrate Non flammable Does not stain For fast and safe jobs Biodegradable Technical Properties Appearance: Clear light green liquid, No Fragrance pH: 7-8 Solubility: Complete in water Non volatiles: 30-32 % Flammability: Non Flammable Chemical Family: Detergent/solvent blend Recommended Uses This product can be used on any fabric, however test an inconspicuous area before to make sure there is no change in appearance. Method of Application Dilute 4-6 ounces of concentrate in 1 gallon of water. Apply to carpets with extractor or spray bottle. When cleaning fabrics or pre-spotting, spray liberally on stains and allow penetrating for at least 5 minutes. Even though product is safe, keep away from children’s reach. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Degreaser - M Stanrose® Degreaser-M is an Environmentally Sensible, heavy duty, non-flammable, non-hazardous, mildly alkaline aqueous carbon remover and degreaser. The product carries a complete corrosion Inhibition package and rinse aid technology. Formulated specifically for cleaning stainless steel, carbon steel, aluminum alloys and all other ferrous and non ferrous metals. Cleans all Types of soils including sulphur based cutting fluids, adhesives, carbon, dirt, oils, grinding, finishing & polishing compounds, water & solvent based inks Carbon, Dirt, Cutting Fluids. Common Name Metal Degreaser Product Code STAN-CLC102 Features and Benefits Can be used safely on all metal Easy to use Leaves smooth, clean surface Just wipe on and wipe off Restores and protects Technical Properties Appearance : Clear liquid – Concentrated Flash Point : >200 Seta Flash Odour : Mild Surface Tension (dynes/cm 24) (water = 1.0) : 24 pH (Full Strength) : 11.50 - 11.70 pH (10% solution in water @ 68 ºF) : 10.80 - 11.00 Ideal Operating Temp (ºF) : 110°F - 160°F Ideal Operating Concentration : 8 - 15% Specific Gravity : 1.070 - 1.080 (@ 68 ºF) Weight/Gal. : 9.00 (lbs. /gal.) Recommended Uses Cleans all Types of soils including sulphur based cutting fluids, adhesives, carbon, dirt, oils, grinding, finishing & polishing compounds, water & solvent based inks Carbon, Dirt, Cutting Fluids. Method of Application Stanrose® Degreaser-M should be used full strength OR diluted down 8 - 15% concentration with water at an operating temperature range of 110o F - 160o F (MAXIMUM OPERATING TEMPERATURE 160 º F). Hand wipe, solution spray, mechanical, or ultrasonic agitation is used to enhance the cleaning action. For carbon, dry oil, grease, polymers, adhesives or inks, soak the parts until residues are removed. Parts can be wiped with a damp rag or rinsed off with warm water. Use filtered hot air to dry out the parts. Storage and Handling Direct contact of Stanrose® Degreaser-M will cause a strong skin or eye irritation, it is important to utilize recommended gloves (18 mil thick natural rubber), safety goggles and other suitable protective clothing your company recommends. Harmful if inhaled or swallowed. Do not take internally. Keep out of reach of children; Use product with adequate ventilation. If splashed in eyes or on skin, wash off with plenty of water. If swallowed remove from exposure area, do not induce vomiting, washout mouth thoroughly with water and drink several glasses of water. Keep at rest. Call a physician immediately. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Bio-Degreaser HP Stanrose® Bio Degeaser - HP is a non-emulsifying degreaser based on a blend of high boiling hydrocarbons and surfaceactive components. It is suited to remove most mineral oils, greases and preserving agents. Safe to use on most metals. Undiluted at a temperature of ± 20 °C it can also be used on most synthetics, paints, lacquers, epoxy and zinc silicate coatings. Common Name Tank Clean – Bio Degreaser Product Code STAN-CLC116 Features and Benefits Water-based degreaser Does not contain nonylphenol ethoxylates or other estrogenic compounds Low-toxic Non-flammable Splits after cleaning, releasing the oil phase for reclamation Micro emulsion based formulation that combines the performance of a water and solvent based product into one low toxic product Helps with rapid hydrocarbon freeing of tanks Technical Properties Appearance - Water white Density [g/ml] - 1.0 Form - Liquid pH - 7.5 Recommended Uses TANK CLEANING - Suitable to remove light oily-like contaminations like alcohols, benzines, fuel oils and liquid / slight viscous surfactants like fatty-alcohol ethoxylates etc. SPRAYING - Stanrose® Bio Degeaser - HP is sprayed undiluted on the objects that are to be cleaned. GENERAL MAINTENANCE - This product can also be used to clean floors in workshops, engine rooms etc. It is often used as de-preserving agent. NOTICE: Objects where rust is to be avoided, should afterwards not be sprayed off with water but with pure (unused) Stanrose® Bio Degeaser - HP. Colourless liquid based on hydrocarbons and surface active components. Non-emulsifying in water and safe to use on most metals. Method of Application TANK CLEANING – CIRCULATION METHOD For the removal of light oily-like contaminations like alcohols, benzines, fuel oils, a dilution of 3 – 5 % is sufficient. For the removal of liquid surfactants like fatty-alcohol ethoxylates etc., a dilution of 8 – 10 % should be used. In case the surfactants are viscous (especially surfactants with an ethoxylationgrade of 15 and higer), the cleaning solution should be heated to max. 55 °C. Recommended tank - cleaning procedure for removing stains from tank linings using Stanrose® Bio Degeaser - HP. 1. Mix solutions of Bio Degreaser 165 either in tank bottom or void space. 2. Dilution rate with water between 3 % and 10 %, depending upon light or heavy contamination (see above). Recent experience has shown that a 7 % - 7.5 % solution secures successful cleaning. 3. Do not use the entire quantity of Bio Degreaser 165 in one solution for all tanks to be cleaned. Save a few drums (2 – 3) to “boost” the solution for cleaning the last 20 % - 25 % of the tanks to be cleaned. 4. The solution may be used at ambient temperature, however, it is suggested that an increase of the cleaning temperature to maximum 55 °C will enhance the cleaning ability and shorten the cleaning time. 5. Proceed to recycle the cleaning solution through the tank washing system for a period of two hours minimum per machine drop. Usually a cleaning time of 4 hours per tank will prove sufficient. 6. At completion of chemical application begin washing down with water, using maximum pressure available. 7. Inspect tank surfaces and if there remain some stains, spot clean with undiluted Stanrose® Bio Degeaser - HP directly on the stained area. Allow a reaction time of 30 minutes and then rinse with water. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. To clean floors, machines and engines, the pure product should be used to moisturize the objects. During the 20 to 60 minutes working time, brushing may help the cleaning process. Spray off afterwards using a high pressure water jet. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Cement Remover Stanrose® Cement Remover is designed to instantly penetrate and disperse cement, providing complete cleaning of cement cargo deposits, dry cement stains and lime deposits. The product is capable of cleaning hard cement deposits perfectly while removing the possible existing rust. Stanrose® Cement Remover is water based and non-flammable containing powerful acids, inhibitors for surface protection and efficient detergents. Common Name Cement Remover Product Code ​ Features and Benefits Heavy duty acid-based product. Effectively removes cement / cement clinkers cargo deposits, dry cement stains and lime. Helps with removing possible existing rust. Quick and intrinsic action. Contains powerful inhibitors for surface protection. Safe to use on rubber/plastic. Water-soluble, non-flammable. Free from hydrocarbon or chlorinated solvents. Cost effective, easy to apply and use. Technical Properties Specific gravity - 1.16 gr/cm3 at 15°C Solubility in water - Appreciable pH (1% Solution) - 1 Odor - Pungent Recommended Uses Safe to use on all metal surfaces and parts except aluminium, zinc, tin and its alloys. It is highly recommended to always test all cleaner solutions on a small area of tank coating, before full scale application. Method of Application A. Dosage Undiluted: In cases where we deal with heavy deposit build–up, CEMENT REMOVER must be applied undiluted. Diluted: In cases of light deposition, on large surface areas, a solution between 10–40% may be used. B. Cleaning Procedure Undiluted/Diluted: In parts such as corner cavities, tank skeleton inlets, etc, CEMENT REMOVER must be carefully poured and/or applied by conventional means such as a hard brush, mop, sponge or any other manual devices feasible to move with rapid and irregular action. Let it soak for 15 minutes. Afterwards, wash thoroughly by applying high–pressure water source. In case of deposit persistence, repeat the cleaning procedure. Storage and Handling CEMENT REMOVER is considered a highly corrosive product. Operators must consult the Safety and Handling instructions table before use. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File