Search Results

Stanrose® One Shot BWT Stanrose® One Shot BWT is a well-balanced blend of boiler water treatment chemicals designed to protect low pressure auxiliary and fire tube boilers against scale and corrosion. It is liquid compound containing alkaline mineral salts, sequestering agents, scale and corrosion inhibitors and sludge conditioners. Common Name One Shot Product Code STAN-BWT146 Features and Benefits “Stanrose® One Shot BWT ” is designed to achieve the maximum degree of boiler protection with a minimum of chemical testing and feed procedures. The system is designed to meet the operating conditions for the low pressure steam generator not requiring the more sophisticated testing and feed procedures. Technical Properties Form Liquid Appearance Clear Solution Sp. Gravity 1.1 Flash Point None pH Value 13.5 “Stanrose® One Shot BWT ” incorporates all water treatment chemicals in one liquid formulation that can be fed directly from the drum. Recommended Uses Oxygen Scavenger : To chemically react with dissolved oxygen there by preventing oxygen" pitting" corrosion. Synthetic Polymers and Alkalinity Control Agents : To chemically react with scale forming minerals forming a nonadherent sludge easily removed by blowdown. These materials also protect against the adherence of oily deposits introduced by oil contamination. Defamer: A defoamer has been incorporated into the formulation to help in the production of clean steam and to prevent the problems associated with the carryover of solids into steam traps and valve. Method of Application Dosage : “Stanrose® One Shot BWT ” can be fed neat to the boiler or can be diluted to any convenient strength. The treatment can be shot fed to any convenient point in the feed water circuit. As a guideline to establishing control on an untreated boiler, feed 2 litres or 4 pints of treatment per ton of boiler water. Adjust feed from then on in accordance with the periodic alkalinity test procedure. If 'p' Alkalinity is above 400ppm decrease treatment. Test Procedure : “Stanrose® One Shot BWT ” consists of two easy to use portable kits. One to record 'P' Alkalinity which indicates that sufficient treatment has been added and one to record Chlorides to control blowdown. Blowdown : Blowdown the low pressure steam generator one a day. For optimum control over boiler water solids if conditions such as high feed water solids or make-up water requirements are encountered. Handling : “Stanrose® One Shot BWT ” contains alkaline materials and care should be taken avoid contact with skin and eyes. In case of contact, immediately flush skin and eyes with plenty of water for 15 mts. Get medical attention. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxycontrol-S Stanrose® Oxycontrol-S is an oxygen scavenger based on sodium sulphite blended with a specially selected catalyst which will effectively speed up the reaction of the sulphite with dissolved oxygen even at low temperatures. Stanrose® Oxycontrol-S is the ideal oxygen scavenger for all water tube boilers operating below 60 atmospheres(850 psi). Common Name Oxycontrol-S Product Code STAN-BWT150 Features and Benefits Feed solutions should be prepared with a minimum of stirring. This solution can be fed alone or in conjuction with other treatment chemicals not affected bob a reducing agent. Approx. fifty liters of "Stanrose® Oxycontrol-S" will be required to chemically react with one part of dissolved oxygen. , feed solutions should be made up fresh daily. Technical Properties For Dosage refer technical data sheet. Usage of Table : 1. Determine sulphite as ppm SO3 in boiler water by testing. 2. Find sulphite range in the table that contains the measured free sulphite residual ( ppm So3) 3. Read the ml of "Stanrose® Oxycontrol-S" needed per 1000 ltrs ( or per metric ton )under the appropriate pressure column. Recommended Uses Even with most modern deareation equipment, trace amounts of dissolved oxygen are found in the feed water. This dissolved oxygen will react with the boiler metal and the tubes to cause corrosion and subsequent failures. "Stanrose® Oxycontrol-S" was formulated to remove these minute traces of dissolved oxygen. The fast reaction rate of our special binded catalyst makes "Stanrose® Oxycontrol-S" particularly useful in systems where the boiler feed water temperatures are low or in cold water system. It is excellent in use in standby boilers for the prevention of standby corrosion. Method of Application Feed Requirements : Feed solutions should be prepared with a minimum of stirring. This solution can be fed alone or in conjuction with other treatment chemicals not affected bob a reducing agent. Approx. fifty liters of "Stanrose® Oxycontrol-S" will be required to chemically react with one part of dissolved oxygen. , feed solutions should be made up fresh daily. Feeding Method : "Stanrose® Oxycontrol-S" should be fed continuously for best results to the storage section of the deareator or to the make-up tank. This will ensure a residual in the feed water system as well as boiler at all times, even when make-up requirements are higher than normal. Diaphragm or piston type reciprocating positive displacement pump as well as bypass feeders may be used. A floating lid will help to prevent reaction with atmospheric oxygen. Feed systems chemical feed pumps for insoluble matter in the tank, outlet should be above bottom of tank and preferably equipped with fine screen strainer. Control : "Stanrose® Oxycontrol-S" is controlled by the sulphite test .A free residual of 30 to 60 ppm is normally maintained in the boiler water. A standard iodimetric titration is used for checking. These test units are available from your Stanrose service engineer. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Coolant It is a blend of organic compound along with 3 to 15% benzotriazole is especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. Common Name Coolant Product Code STAN-CLC084 Features and Benefits Protection against cavitation and corrosion Technical Properties Appearance - Clear Liquid Density - 1.096 g/cm3 Product pH - neat 9.5 Corrosive Action - None Recommended Uses At concentration of 10% by volume, "Stanrose® Coolant" affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals. Method of Application The "STAN-2000-018" should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water, mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits: Water hardness : 0 - 100 ppm Chloride contents: max 100 ppm Sulphate contents: max 100 ppm The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water. Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Deck Cleaner This Eco-Safe deck cleaner is just what you need to clean your deck or to prepare it for staining or water sealing. Stanrose® Deck Cleaner not only cleans the wood decking but restores the wood to a "like new" colour tone, removing the grey weathered wood fibers. No chemical odours, non damaging to plants or grass, not harmful for your pets or children this Stanrose® Deck Cleaner is the ultimate deck cleaner. This video below shows you the entire deck cleaning process, the deck in the video is made of expensive mahogany wood, and you will notice how the colour comes back to the mahogany decking. Stanrose® Deck Cleaner works on all types of wood decking. Stanrose® Deck Cleaner will also dissolve old deck stain so that it can be cleaned and re-stained. This product is made from hydrogen peroxide there is no chemical odours or fumes. Stanrose® Deck Cleaner will not harm plants or grass and it’s safe to use over water, it biodegrades very rapidly only hours after use. Stanrose® Deck Cleaner will not harm people or pets; it will not stain other surfaces and is both safe and highly effective Stanrose® Deck Cleaner is formulated to penetrate wood and uses oxygen bubbles to extract debris from the decking so it can be easily cleaned off. Use of Stanrose® Deck Cleaner and a power washer will greatly lengthen the amount of time your deck will remain clean with a great new look that you just worked so hard to provide. Stanrose® Deck Cleaner will remove surface stains caused by mould and mildew. Common Name Deck Cleaner Product Code STAN-CLC107 Features and Benefits You can use our Deck Wash to safely and easily clean your deck and you can rest easy knowing that it won't harm your plants or produce noxious, stinging fumes. If you are having troubles with your composite decking, try our Composite Deck Wash. If you've cleaned your deck and you want to protect it, check out our Sealers and Stains section. Highly concentrated Waterborne Removes waterborne stains from windows Removes light rust and rust stains from painted and wooden surfaces, metals and glass. Does not contain nonylphenol ethoxylates or other estrogenic compounds. Phosphoric acid free Readily biodegradable Easy to rinse off Non-flammable Technical Properties Form Liquid Appearance Light yellow Density 1,2 pH, in 1% sol. 2 Not Compatible Long term exposure may lead to corrosion of mild steel, cast iron, aluminium and alloys, brass, tin or galvanised material. Recommended Uses Use as a cleaner or use before staining or water sealing. Deck Wash is great on mahogany, teak, pine, cedar, pressure treated or any type of wood. Great on decks, fences, docks, furniture, or any exterior wood surface. Method of Application Coverage Every 2lbs of product will clean 600-800 sq. ft. Directions Add 1⁄2 cup per gallon of water, mix well, stirring frequently, allow the solution to fully activate for 15 minutes prior to use. Apply product with "garden-style" pump sprayer or mop, scrub with brush, keep area moist with product while brushing and rinse with water. For top "professional" results and for decks that haven't been cleaned for a long time use a pressure washer instead of scrub brush and hose. Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Vaptreat Stanrose® Vaptreat is a concentrated liquid blend of polymer and antifoam agents for controlling scale and foam in evaporators. Stanrose® Vaptreat is Approved by the Norwegian National Institute of Public Health for application in evaporator systems that are used to produce potable water. Common Name Vapour Treatment Product Code STAN-SSC209 Features and Benefits Stanrose® Vaptreat prevents scale by crystal distortion, dispersion, and absorption of scale forming minerals. Crystal distortion As soluble minerals are forced out of solution during evaporation hey go through an intermediate crystal stage before forming dense deposits. Stanrose® Vaptreat reacts with the crystals causing them to be distorted and irregularly shaped. The distorted crystals do not form dense and uniform deposits which would adhere to evaporator surfaces. Ensures that the evaporator works at maximum efficiency by keeping heat transfer surfaces free of scale The antifoaming properties ensure that distillate quality is high as carry over is eliminated Will gradually remove existing scale when dosed at twice the normal rate Concentrated, safe liquid, easy and economical dosing Technical Properties Appearance pale yellow liquid Flash Point none PH of 1% solution 9.2 Specific Gravity 1.09 Recommended Uses Stanrose® Vaptreat should be fed continuously to the evaporator inlet line. Stanrose® Vaptreat can be diluted with fresh water and the feed solution introduced with an eductor or an positive displacement metering ppm. Method of Application The specially selected polymers in Stanrose® Vaptreat combined with the potential scale forming salts in the brine to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and removed with the evaporator brine. The operating efficiency of the plant is maintained for maximum water production. The intervals between cleaning are greatly increased. The product to use for acid cleaning is Stanrose® Descaler, which will remove old scale prior to treatment with Stanrose® Vaptreat . Evaporators have a tendency to produce foam while operating - the de-foaming properties of Stanrose® Vaptreat will stop this foaming and carry-over will be eliminated. Distilled water quality is maintained. Dosing Method The standard dosage, applicable to the majority of systems, is 15-30 ml of Stanrose® Vaptreat per ton of distillate produced. This is based on the rated production capacity of the evaporator. Example: In a 25 ton/day evaporator. Treatment used = 25 x 30 ml = 750 ml of Stanrose® Vaptreat per day. Setting the Flow Rate The treatment is added to the dosage tank and mixed with water. Example: With the 0.75 litres of Stanrose® Vaptreat add sufficient water to make up 50 litres of liquid. Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting This will last 24 hours. A metering pump can also be supplied for use with Stanrose® Vaptreat if required. N.B. The brine density should not exceed 1.038 g/cm3. The scaling potential increases rapidly over this level. An increase in the amount of Stanrose® Vaptreat used will assist in retaining potential scale forming salts in suspension. For example: If the density rises to 1.050 g/cm3 the dosage should be 60 ml/ton of rated capacity. Dosage : The recommended dosage rate for Stanrose® Vaptreat is 5 to 10 ppm based on type, usage and operating conditions of the evaporator. Your Stanrose® service engineer will readily guide you on the correct dosage. It is preferred that the evaporator be clean and free of deposits before Stanrose® Vaptreat is introduced . Stanrose® Vaptreat will clean up moderate amount of existing deposits. Double the dosage rates previously recommended during the clean up period. Storage and Handling No special precautions required. Use the same care as in handling other chemicals used for maintenance. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Electriclean The Stanrose® Electriclean, is an electric motor and machinery cleaner, designed to clean and degrease in-place running electric motors. It is a non-corrosive, no flash point, high dielectric strength and powerful cleaning solution capable of ridding dirt, grime, grease and oil off metal electric motor components, including precision parts, rollers, elevator shafts, control points, bearings, coils and rotors. Leaving no residue and containing no CFCs or trichloroethylene, the Stanrose® Electriclean is also clean and safe to use. Rigorously tested to ensure performance is up to mark, it is a handy tool suitable for use in places where electric machinery sees extensive use and the cleaning of electric components are vital to maintain smooth operation, such as manufacturing plants, printing plants, garages, automotive repair shops, office buildings, hospitals, restaurants, schools. Common Name Electric Motor & Machinery Cleaner Product Code STAN-CLC077 Features and Benefits Non-conductive Contains no CFC’s or Trichloroethylene Leaves no residue Reduces condensation Excellent for degreasing electric motors Technical Properties Flash Point >93°C (Seta Flash) Odor Ether-like Water Content None Dielectric Strength 20,000 Volts Kauri-Butanol Value 122 Specific Gravity 1.55 Boiling Point 68C Recommended Uses Precision parts Intermediate gears in water meters Machines in non-food handling areas Printing presses, rollers, blankets, offset type and mats Elevator shafts and parts Power generators, control points, end bells and bearings Generators, starters and voltage regulators Instrument parts, bearings and cases Condensers and coils Air condensing motors and equipment Stator frames and rotors Bottling plant machinery • Machinery & motor in paper and lumber mills • Marine deck machinery, motors and generators Method of Application POWERFUL CLEANING ACTION Penetrates, dissolves, and lifts out dirt, oil, grease and grime. NO FLASH POINT Reduces fire-causing hazards around sources of ignition such as sparks and engine heat NON-CORROSIVE TO MOST METALS Will not pit light alloys and plated finishes HIGH DIELECTRIC STRENGTH OF 20,000 VOLTS Most equipment can be cleaned without time lost for disconnecting QUICK EVAPORATION Can be use in areas that can’t be blown dry REDUCES MOTOR BREAKDOWN AND CUTS ENERGY COST Reduces downtime and expensive repair costs. Motor runs cooler and uses less energy. Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Chlorine Tab Stanrose® Chlorinating Tablet is a dry organic chlorine in tablet form giving a high available chlorine base, ensuring an effective sterilising and disinfecting action in slow release form. 200g tablet with 90-92% available chlorine. For chlorination of swimming pools, sewage and waste water.Standard tablet size: 75 mm diameter - 25 mm H. For swimming pool water treatment: 4 large tablets every 100 m3 of water to be put in skimmers or in floating trays. For waste water treatment, fill the chlorinating pipes until 2 to 5 PPM of residual active chlorine are obtained. If below 2 PPM, use both chlorinating pipes. Common Name Chlorinating Tablet Product Code STAN-CLC075 Features and Benefits Purification of Drinking Water. Treatment for Sewage. Technical Properties Appearance Tablet Form UN No. 2468 Active chlorine % ≥ 90.0 Class 5.1 Chemical Formula C 3 O 3 N 3 CL 3 Moisture% ≤ 0.5 Molecular Weight 232.41 PH (1% solution) 2.7-3.3 Molecular formula 143.0 Store Store in cool, dry, well ventilated area. Melting Point 235 Recommended Uses Treatment for Swimming Pool. Method of Application Dose: The tablet is dosed to the water supply tank preferably suspended away from the fabric of the tank. The tablets should not be allowed to rest on the bottom of metal tanks. Being in tablet form this is a safer method of administering chlorine than the usual liquid preparations. When used as part of a planned programme of protection it will assist in control of problems associated with such areas as bacterial and organic fouling including legionnaires disease. Dose Rate: Rates will be determined by the extent of current problems. An initial dose will be required to give a free residual chlorine reserve of 5-50ppm for a minimum of 1 hour. Thereafter a reserve of 0.5-2.0ppm is normally sufficient. Also available as rapid dissolving 1 tablet will give 50ppm chlorine in 3.6m3 water. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Dieslite Stanrose® Dieslite is a catalytic combustion improver which permits the burning of lower cost residual fuel oils. Common Name Dieslite / Fuel Oil Stabilizer / Fuel Combustion Improver Product Code STAN-FOT192 Features and Benefits The catalytic properties of Stanrose® Dieslite allow heavy fuel particles to be successfully consumed during the act of combustion. Ignition temperature is lowered and combustion improved. In addition physical agents decrease or prevent sludge formation and separate emulsified water. The catalytic properties of STANROSE® DIESLITE also help to prevent the formation of acidic gases, which typically create sulphuric acid corrosion in the cooler parts of the boiler or engine. These include cylinder liners, valve stems, exhaust trunking and funnel uptakes. Technical Properties CCR % = Conradson Carbon Residue is mentioned in the technical data sheet. Recommended Uses Engine and exhaust components are kept cleaner with less maintenance and cleaning required. Less carbon and soot is emitted thereby reducing smoke. The fuel system has less clogging and better fuel flow, giving better combustion. Acid corrosion is reduced in the cold end of the engine. Fuel tanks and pipes are left clean and free of sludge. Method of Application STANROSE® DIESLITE should be fed via a metering pump into the suction side of the booster pump. As a second option it can be added to the settling tank. Ideally dosage rates should be determined from fuel analysis tests. Alternatively as a general guide a dose of 1:4000 should be applied. For a regular maintenance programme a dose of 1 litre per 25 tonnes is recommended. Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® SPOL "Stanrose® SPOL" is a pH-neutral, liquid concentrated detergent with good cleaning qualities. It is multi- purpose heavy duty cleaning soap solution used as a common dirt remover in residential, commercial and industrial cleaning processes. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. "Stanrose® SPOL" is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate. Common Name Tank Cleaning Surfactants Product Code STAN-CLC056 Features and Benefits Non-caustic, pH neutral Solvent free Non-flammable Does not contain nonylphenol ethoxylates or other estrogenic compounds Non-corrosive to metals Suitable for all tank-coatings Can be used for gas and hydrocarbon-freeing of tanks Can be used for deodorizing Complies with all environmental regulations and the EU Detergent Regulation Technical Properties Form Liquid Appearance Light Yellow Density 1, 1 pH, in Conc 8-9 pH, in 1% Sol 7-8 Recommended Uses Universal cleaner for home, institutes, plant and machinery. compatible with all type of surfaces. Method of Application Dosing Method The most economical method of using "Stanrose® SPOL" is by recirculation washing, using tank cleaning machines. Make up a solution of 1 – 5% in preferably fresh water in the tank and re-circulate. Whenever possible, the cleaning solution should be heated to 50 - 80°C. Rinse off with hot fresh water. Alternatively, hand spray the tank with a 20 – 50% solution of "Stanpol-1006" and allow to stay for 30 – 60 minutes before a final rinse with hot water. When the tank is cleaned to a “water white standard”, remove any free water and ventilate until the tank is dry. Sampling and Tasting : For the removal of traces of hydrocarbons to a hydrocarbon free wall wash test specification prior to loading of sensitive cargoes. "Stanpol-1006" may also be used as a general purpose economical tank cleaning detergent. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Hyrocarbon Remover Stanrose® Hydrocarbon Remover cleans is a multipurpose neutral cleaner to remove vegetable and animal oils and fats from zinc-silicate coated tanks. "Stanrose® Hydrocarbon Remover" Cleans removes remaining hydrocarbons from any tank surface after carrying light to moderate cargoes or after cleaning with solvent based degreasers. Common Name HCF Cleaner / Remover Product Code STAN-CLC063 Features and Benefits Hydro Carbon Free cleaner Cleaning of vegetable and animal oils from zinc coated tanks Suitable in stainless steel tanks and epoxy coated tanks Removes grease, oil, carbon deposits, soil and grime. Keeps loosened deposits in suspension preventing re-deposition. Low toxic. , Non-flammable. Free from hydrocarbon solvents. Effective and economical in use, Water-based cleaner. Technical Properties " Stanrose® Hydrocarbon Remover " has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime. Non-corrosive to ferrous metals. Suitable for all tank-coatings. Can be used for gas and hydrocarbon freeing of tanks. Can be used for deodorizing Contains weƫng agents. Recommended Uses First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using " Stanrose® Hydrocarbon Remover " is by direct injection followed by re-circulation washing, using tank cleaning machines. Method of Application First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using " Stanrose® Hydrocarbon Remover " is by direct injection followed by re-circulation washing, using tank cleaning machines. Spraying Method : Using " Stanrose® Hydrocarbon Remover " as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60°C for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tank(s) and if desired result has been achieved fresh water rinse and dry. **Make sure to take all safety precautions are followed when handling / spraying “Stancare-HCF Cleans”** Injection Method : not applicable. Re-circulation Method : Fill tank with fresh water and heat up to warm 50o C . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and " Stanrose® Hydrocarbon Remover " to make a 2.5% solution. A stronger solution can be made, but be advised that too much caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. ** Use a strainer at the pump stack when circulating any solution.** Note : Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate. For detailed information on safety and health, please refer to the Material Safety Data Sheet MSDS and/or product label. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Anti Moist Electrosolv Stanrose® Anti Moist Electrosolv is a multi purpose cleaner that easily removes oily soils, displaces water, and leaves behind a lubricating, corrosion protective, non-greasy film, Stanrose® Anti Moist Electrosolv maintains and restores electrical and electronic equipment from the effects of moisture and corrosion. It also protects metals against corrosion. Common Name Moist Remover Electrical Cleaner Product Code STAN-CLC082 Features and Benefits Stanrose® Anti Moist Electrosolv has a low surface tension and high capillary action that allows it to spread rapidly over any metal surface, displacing water and moisture as it spreads. Its penetrating action seals the metal surface preventing corrosion, restoring and maintaining resistance of insulating materials. Technical Properties Refer technical data sheet Recommended Uses Stanrose® Anti Moist Electrosolv be safely used on all metals and painted surfaces, motors, control panels, switchgear, ignition systems, relays, precision tools and instruments, machined surfaces, etc. It will not harm most plastics, rubber or paint when used as directed. Method of Application Liberally apply Stanrose® Anti Moist Electrosolv on all surfaces and equipment to be cleaned and protected. This can be done by aerosol spray, brush, swab of immersion methods. For scaled/ solid surfaces apply Anti-Moist thoroughly to form protective film over descaled areas. Immersion of wet parts will cause water to fall off and sink to bottom of container. There is no need to remove Anti-Moist before using equipment. However, prior to painting of parts treated with Anti- Moist rising with Stanrose® Electrical Cleaning Solvent may be desirable. For restoration of electrical equipment and metal parts after flooding, firstly, remove salt water deposits and dirt with fresh water. Then saturate all parts of the equipment with Anti-Moist preferably by immersion. Periodic measurement of the insulation resistance will indicate return of equipment to operating conditions. Storage and Handling Anti-Moist should be used only with adequate ventilation. Avoid prolonged breathing of vapours or skin contact. DO NOT SWALLOW. Keep away from open flame and high radiant heat. Do not puncture or throw aerosol cans on fire. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Multi Clean A multi-purpose concentrated cleaner/degreaser precisely formulated for industry; removes stubborn soils, greases, oils, sludge, and soot. Stanrose® Multi Clean is a cleaner, degreaser and disinfectant developed for the automotive, industrial, military and domestic marketplace. The unique formula contains technology that weakens a soil’s ability to cling to surfaces and lifts soils and traps them in a tiny bubble known as a micelle to be rinsed away. Stanrose® Multi Clean is a water based formula that is VOC compliant in all 50 states and contains no petroleum or chlorinated solvents. Common Name Multi Purpose Cleaner Product Code STAN-CLL090 Features and Benefits Super industrial strength removes tough stains and soils Special blend of surfactants, detergents, emulsifiers and builders VOC compliant in all 50 states Water soluble solution No petroleum solvents No bleach No ammonia Non-flammable Non-abrasive Technical Properties Chemical Type Water-based alkaline cleaner containing proprietary ingredients, surfactants, and disinfectant Appearance Clear liquid Odor Mild Flash Point TCC F(C) 182(83) Specific Gravity 1.02 pH 12.7 Recommended Uses Engines Castings Tanks Motors Dies Machine parts Machinery Valves Fiberglass Auto parts Bearings Shop equipment Tools Molds Compressors Concrete Shop floors Grease traps Uniforms/towels Substances (Soils) Removed Grease Lubricants Oil deposits Tar Food stains Wax Grout stains Mildew and algae stains Smoke and soot Ink Dirt/mud Fingerprints Black streaks Method of Application Note: It is a violation of Federal law to use this product in a manner inconsistent with its labelling. Some surfaces, such as aluminum alloys, are inherently sensitive to alkaline cleaners. Always test on a small area of surface to be cleaned and air dry completely to determine color fastness and surface integrity. Do not use on wool, leather, glass, untreated wood, treated fabrics or weathered surfaces. Do not use this product in combination with caustics, acids or bleach. To Clean: 1. Spray on soiled surfaces 2. Wipe thoroughly with a clean, damp sponge/cloth or rinse with water. (Do not allow to dry on surface.) 3. Note: Heavy deposits, stubborn soils and stains may require scrubbing or additional applications. To Sanitize hard, non-porous surfaces 1. Clean surface as instructed above. 2. Spray thoroughly, making sure to wet all surfaces completely. 3. Allow to stand for 10 seconds minimum. 4. Wipe thoroughly with a clean, damp sponge/cloth or rinse with water. To Disinfect/Deodorize 1. Clean surfaces as instructed above. 2. Repeat application making sure to wet all surfaces thoroughly. 3. Allow to stand for 45 seconds (30 seconds for viruses). 4. Wipe thoroughly with a clean, damp sponge/cloth or rinse with water. 5. When used on food contact surfaces such as counters and tables, rinse thoroughly with potable water. Do not use on dishes, glasses or silverware. 6. When used in meat and poultry plants, food products and packaging materials must be removed from room or carefully protected. After use, surfaces must be rinsed with potable water. To Control Mold and Mildew on pre-cleaned hard, non-porous surfaces 1. Spray thoroughly making sure to wet surfaces completely. 2. Allow to stand for 3 minutes. 3. Wipe off with a clean damp sponge or cloth or rinse thoroughly with water. 4. Reapply as necessary. Fungicidal activity: Stanrose® Multi Clean kills Trichophyton mentagrophytes (pathogenic fungi that causes athletes foot fungus) and Candida albicans in areas such as shower and bath areas, locker rooms and dressing rooms on pre-cleaned, hard, non-porous surfaces. Spray thoroughly, making sure to wet surface completely. Allow to stand for 3 minutes minimum before rinsing. Fungistatic activity: When used as directed above, Stanrose® Multi Clean is an effective fungistat in controlling the growth of Aspergillus niger (Fungi associated with Otomycosis and nasal sinus infections). Storage and Handling Keep from freezing or temperature greater than 120ºF. Store in original container in area inaccessible to children and persons unfamiliar with proper product use. Containers 1 gallon or less may be refilled with Stanrose® Multi Clean. Do not use empty bottle with any other product. Rinse empty container thoroughly and discard in trash or recycle where available. Packing Available 25 Ltr. / 210 Ltr. Download File