Search Results

Stanrose® Alkaline Cleaner HD Stanrose® Alkaline Cleaner HD is a high performance, heavy duty alkaline cleaner and detergent available in a liquid concentrate form. It is scientifically formulated for use in soak tanks, high pressure washers, automated scrubbing machines as well as for manual application. Stanrose® Alkaline Cleaner HD is specially formulated from a blend of soaps, synthetic detergent, solvents and inorganic alkaline builders and comes in a highly concentrated form. This product is an extremely versatile heavy duty industrial cleaner developed specifically for use in automated scrubbing machines, high pressure washers, soak tanks as well as for manual use. Common Name Heavy Duty Alkaline Cleaner Product Code STAN-CLC055 Features and Benefits Highly efficient heavy duty cleaner Highly concentrated Use in soak tanks, high pressure washers, automated scrubbing machines, manual use Technical Properties Form - Liquid Specific Gravity - 0.79 Appearance - Colourless Flash Point - 40°C Odour - Hydrocarbon Auto Ignition Temp - 225°C Recommended Uses Use in automated scrubbing machines, high pressure washers, soak tanks as well as for manual use. Method of Application Generally concentrations between 0.5% and 5% by volume are suggested depending on severity of soiling. Always thoroughly rinse after cleaning. Important - Do NOT use on aluminium or galvanised articles. It is always advisable to carry out a 'Control of Substances Hazardous to Health' (COSHH) assessment before use. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Aqua Degreaser "STANROSE® AQUA DEGREASER" is mixture of Emulsifier, new technology surfactants (With high solvency and emulsification effect), Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas. Acts as superior quality cleaner / degreaser. "STANROSE® AQUA DEGREASER" containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper, Brass and Tin. "STANROSE® AQUA DEGREASER" is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing may be applied by brush, hand spray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be Removed. Common Name Aqua Break Product Code STAN-CLC068 Features and Benefits Compa􀆟ble with oily water separators. Releasing the oil phase for reclama􀆟on. Suitable for all types of floors. Deodorizing nature Eliminates the need to buy & stock duplicate products due to its effec􀆟veness. An economic highly concentrated product. Also used for gas and hydrocarbon freeing of tanks. Free from caus􀆟c & hydrocarbon , Non flammable. Water based , Biodegradable. Safe to metal Technical Properties Colour - Yellow Appearance - Clear Liquid Odour - None / Infinite in water Density - g/cm3 at 15°C: 1.0 +/- 0.05 Metal Compatibility @ 25°C: 0.850 – 0.860 Rubber Compatibility @ 20°C: 1.469 – 1.472 pH Neat 10-11 Recommended Uses Tank Cleaning : Cargo tank cleaning after mineral, animal, vegetable and fish oil. Method of Application 1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water. May be brushed on, sprayed (Hand spray/Direct injection) re-circulate the system with "STANROSE® AQUA DEGREASER" Solution 1. Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%). 2. Cleaning with re-circulation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%). 3. Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before washing off. "STANROSE® AQUA DEGREASER" has a de-odorizing nature. and is not flammable. Doses : Nature of Residue | Hand Spray | Direct Injection | Circulation Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines) | 1 - 10% | 0.03-0.5 % | 0.05-0.7 % Organic Material (Hydrocarbon) | Not Available | 0.0 5-0.5 % | 0.05-0.7 % Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxalwash Stanrose® Oxalwash is a 100% super concentrated powder so you can safely dilute it to suit your cleaning task. It is a much safer option than most other acids used in cleaning including Hydrochloric and Hydrofluoric Acid. Common Name Oxalic Based Metal Body Cleaner Product Code STAN-CLC114 Features and Benefits Removes Rust, Iron Stains, Tannins, Scale and other Mineral Stains Suitable for Laundries & Specialty Stain Removal Applications Readily Biodegradable - Naturally occurring organic acid Technical Properties Phosphate free Septic safe Grey water safe A safer alternative Recommended Uses Stanrose® Oxalwash is used by many different industries for many different applications. Exterior timber deep cleaning and preparation Commercial Laundries - Rust and mineral deposit remover on fabric Building & Construction Cleaning - Mineral staining, grout, mortar, bricks, tiles, pavers. Professional Carpet Cleaning - Rust and mineral stain removal. Rust, scale and water mark removal from baths, basins and other washroom surfaces. Hard wood stain removal on concrete and carpet Method of Application Read SDS and PIS before use Do not mix with other chemicals including laundry powders and liquids Always wear suitable gloves, body and eye protection ALWAYS TEST FIRST - Because all surfaces are different, we always recommend that you perform a small test patch in an inconspicuous area to ensure the products suitability to the surface and your expectations will be met. Timber Instructions 1. Test first 2. Dilute 125-250g of Stanrose® Oxalwash into 5 litres of water. (Some timber applications may require higher concentrations) 3. Apply to surface with broom, brush, scourer or doodle bug. 4. Scrub with brush (medium to hard bristles) or doodle bug scourer and let dwell on surface for 5 to 10 minutes not allowing the surface to dry. 5. Remove and rinse thoroughly 6. Repeat process if required. Increase the amount of Stanrose® Oxalwash added to the water where necessary and start by testing first again. Building & Construction Instructions 1. Test first 2. Dilute 125-250g of Stanrose® Oxalwash into 5 litres of water. 3. Apply to surface with broom, brush, scourer or doodle bug. 4. Scrub with a suitable agitation method (ie. scourer, brush, machine, doodle bug) and let dwell on surface for 5 to 10 minutes not allowing the surface to dry. 5. Remove and rinse thoroughly 6. Repeat process if required. Increase the amount of Stanrose® Oxalwash added to the water where necessary and start by testing first again. Professional Carpet Cleaning Instructions 1. Test on a small inconspicuous area first to ensure suitability of this product on the surface. 2. Remove any debris or excess stain deposits 3. Dilute 50g of Stanrose® Oxalwash into 2 litres of water. You can make a weaker solution for less severe staining. 4. Spray or pour onto the fibre or fabric until wetted out. Do not over wet. Agitate gently if required. 5. Allow to stand for at least 5 minutes and for more stubborn stains allow 10-20 minutes dwell time. 6. Rinse & Extract with diluted pH neutral carpet/upholstery pre-spray and machine. For best results add ‘Plush – Carpet and Upholstery Rinse, Softener & Cleaner’ to your water in your machines solution tank. (If a machine is unavailable you can blot away with a damp clean white towel and then neutralise with Houdini Multi Task Spotter or Aussie Encappa diluted at 1:4. Blot away again with another damp white towel to remove all chemical and stain residue.) 7. Allow to dry. (You can assist drying by ensuring good ventilation and using an air mover) 8. Repeat process if necessary. Tips for use on carpet: Do not overwet carpet or upholstery with diluted solution. Attend to spots and spills as soon as possible. Fresh spots are significantly easier to remove. Stains that are left too long or treated with the wrong chemical can become permanent. Always do your stain removal working from the outside of larger stains to the inside. This prevents the stain from spreading. Laundry Instructions To remove rust and iron stains from laundry add 100-200g of Oxalic Acid to the hot pre-soak water. These quantities may be varied for different amounts of laundry to be soaked. Oxalic Acid can be used on fabrics including cottons, poly cottons, silk and wool. Oxalic Acid is recommended for specialty stain removal when laundering all types of linen including uniforms. Important 1. Do not use this product before reading and understanding the safety data sheet and Product Information Sheet. 2. Always wear personal protection equipment (refer to MSDS) 3. Oxalic Acid has the ability to dull or etch polished (shiny) natural stone surfaces. 4. Oxalic Acid is classified as hazardous under the criteria of Worksafe India. 5. Always pre-test in an inconspicuous area to ensure suitability before using this product. 6. Do not mix with any other chemicals 7. Some staining is permanent and can not be removed with a chemical. Replacement or restoration of surfaces may be required. Storage and Handling Avoid contact with skin and eyes. Avoid breathing vapour. See separate Safety Data Sheet available on request for more information. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxycontrol-H When operating modern boiler facilities even under ideal conditions, trace quantities of oxygen are left in the feed water despite mechanical de-aeration. Common Name Oxycontrol-H Product Code STAN-BWT149 Features and Benefits "Stanrose® Oxycontrol-H" is a liquid and easy to feed. It will convert ferric oxide to a protective film of magnetic. Single colourimeteric control test. It doesn't contribute dissolved solids to the boiler water. Reduced blow-down costs. Makes iron oxide sludge non adherent by completely changing its composition. Technical Properties Feed solutions should be prepared with a minimum of stirring. Approx. 6.5 parts of "Stanrose® Oxycontrol-H" are required to chemically react with one part of dissolved oxygen. When using "Stanrose® Oxycontrol-H" in a system for the first time, dosage requirements will be much higher due to the consumption of "Stanrose® Oxycontrol-H" by the ferric oxide present. Because of the reaction of "Stanrose® Oxycontrol-H" with air, feed solutions should be made up fresh daily. Recommended Uses "Stanrose® Oxycontrol-H" will chemically react with active oxygen to form inactive gases of nitrogen and water. Additionally "Stanrose® Oxycontrol-H" passivates metal surfaces through the formation of protective oxide films thereby minimizing iron and copper deposits in the boiler. Method of Application "Stanrose® Oxycontrol-H" should be fed continuously for best results. A positive displacement pump should be used to feed "Stanrose® Oxycontrol-H" into feed water after the deareator. Continuos feed to this area will supply continuos corrosion protection to the feed water control. "Stanrose® Oxycontrol-H" is controlled by checking the feed hydrazine residual in the boiler water. The recommended range is 0.1 - 0.2ppm. Control testing is a simple colourimeteric cooperator which is available from Stanrose. Storage and Handling Avoid contact with skin and eyes. Avoid breathing vapour. See separate Safety Data Sheet available on request for more information. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. "Stanrose® Oxycontrol-H" is harmful if swallowed. Skin contact and vapour inhalation should be avoided. Protective equipment should be worn when handling "Stanrose® Oxycontrol-H". "Stanrose® Oxycontrol-H" does not have a flash or fire point and does not represent a fire hazard. Direct contact and storage in high temperature areas should be avoided. Keep container closed when not in use. Do not store near acids or oxidising agent. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Paint Remover A fluffy, thick jelly like stripping compound based on non-flammable solvents, to soften, dissolve and remove dry old paint layers. It can remove air drying alkyd paints, stoving paints and water based paints effectively. It can also remove two component polyurethane, epoxy and other coatings with applications in extended times. It has good penetration properties and allows quick removal of paint without any considerable damage to the substrate. Common Name Paint Remover Product Code STAN-CLC088 Features and Benefits Highly effective, ready for use type, easy to apply, useful for various types of old coatings removal. Technical Properties APPEARANCE Fluffy thick jelly liquid / Hazy SPREADING RATE The spreading rate required to remove the coatings, depends on various factors like type of coating, thickness of coating and substrate etc. SPECIAL PRECAUTION Use protective hand gloves, goggles, solvent masks etc. while using Paint Remover. In case of any accidental skin contact, wash with plenty of fresh water. Keep away from reach of children. FLASH POINT Not applicable SOFTENING TIME 15 – 20 minutes Recommended Uses National Paint Remover is recommended for removing various hard and dry coatings like Syn. Enamels, Stoving Enamels, NC, Water based Coatings etc. It can be applied on coatings over metal, concrete, plaster, glass etc. It is recommend to use without any dilution. Method of Application SURFACE PREPARATION Before application, check the nature of the surface. Application can be done by the recommended application method. APPLICATION METHOD Brush, Roller, Scraper CLEANING/THINNING National GP Thinner THINNER (VOLUME) Ready for use RECOMMENDED METHOD OF USE Apply thick coat of National Paint Remover on the required coating surface to be removed. Allow to soak the film for 10 – 15 minutes, during this time paint film will start to delaminate from the substrate. The delaminated, soaked film along with excess chemical,if any, can be removed with scraper. If the film is more thick and hard, it may be necessary to repeat the process more than once. After complete removal of paint, clean the surface properly to remove completely any traces of chemicals remains on the surface. Storage and Handling 18 months, in original sealed container, with proper storage conditions. As a general rule, avoid skin and eye contact by wearing overalls, gloves, goggles, and airmask etc. Spillage on skin should immediately be removed by thorough washing with water and soap or suitable cleaner. Eye should be flushed with fresh water. Avoid inhalation of vapours and paint mist by wearing suitable airmask. In the event of ingestion and eye contact, seek medical attention immediately. Painting must be carried out in wellventilated area. This as industrial product contains corrosive materials and is hazardous. It should be used with adequate precautions. Smoking in the area should not be permitted. Local safety regulations should be followed. Store the paint remover in proper storage conditions as per the local regulations. Keep the paint remover container in sealed condition under shed in a cool area, away from direct sunlight and extreme temperatures. Do not stock paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied material, to avoid contamination. Handle with care. Do not stir the material. Before application soft mixing is recommended. Always keep in recommended plastic cans. This product contains corrosive materials and is hazardous. It should be handled with care. Keep away from the reach of children. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® 3-in-1 Rust Cleaner Stanrose® 3-in-1 Rust Cleaner is an incredibly versatile product which acts as a light duty lubricant, penetrant/release agent, dewatering fluid and corrosion preventative. Stanrose® 3-in-1 Rust Cleaner contains a blend of cleaning solvents to wash away residues of oil and grease, dispelling water and allowing deep penetration into threads and mechanisms. A combination of mineral oils and oxidised waxes provide lubrication and unrivalled corrosion protection. In aggressive accelerated salt spray tests Stanrose® 3-in-1 Rust Cleaner has been shown to provide up to 3 times the protection of rival products. Common Name High quality 3 in 1 corrosion preventive, moisture displacer and light lubricant Product Code ​ Features and Benefits Versatile and effective non sticky light duty lubricant. Penetrates and releases corroded components, nuts and bolts. Non conductive Displaces water from wet components, switches, motors and ignition systems. Protects electrical contacts from corrosion. Contains oxidised waxes and corrosion preventatives. Protects components, mechanisms and equipment from corrosion during storage and following aqueous cleaning. In accelerated corrosion testing Stanrose® 3-in-1 Rust Cleaner provided up to 100 hours salt spray resistance. Solvent cleaning action flushes away residues of old oil and grease. Safe for use on ferrous and nonferrous metals. Technical Properties TECHNICAL DATA (for bulk liquid) APPEARANCE - Liquid COLOUR - Brown ODOUR - Hydrocarbon Solvent SPECIFIC GRAVITY - 0.80 VOC CONTENT - 644g/l SOLUBILITY - Insoluble in water SALT SPRAY - Up to 100 hours BOILING POINT (°C) - 155 FLASH POINT (°C) - 43 P/M Pensky-Martens. VISCOSITY - 3 cps @ 20°C SURFACE TENSION - 20 mN/m @ 20°C TECHNICAL DATA (aerosol) APPEARANCE - Aerosol PROPELLANT - Hydrocarbon Recommended Uses Release of tightly corroded components, nuts and bolts during maintenance and repair. Routine lubrication of mechanisms switches and contacts during maintenance. Displacement of water from electrical and ignition systems. Protection of components, machined surfaces and equipment from corrosion during storage or transit. Protection of manufactured items in production environments to prevent corrosion, aid assembly and ensure items remain in original condition following storage. Method of Application When applying to electrical components and switches ensure power is switched off prior to application and allow to drain and air dry fully before reconnection. Stanrose® 3-in-1 Rust Cleaner may be applied by spraying onto and around the component. For release of nuts and bolts allow a short contact time following application to ensure total penetration. It is often better to tighten nuts slightly to crack the rust prior to unwinding. Stanrose® 3-in-1 Rust Cleaner may also be used for immersion of components in trays or deep tanks. This is particularly effective when using Stanrose® 3-in-1 Rust Cleaner as a corrosion preventative in production situations. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Flammable liquid storage. Health and Safety Data sheet available separately. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Seacare OSD-III Dispersants are chemicals that are applied directly to an oil slick. The key components of chemicals dispersants are surface active agents called Surfactants. Stanrose® Seacare OSD-III assists with breaking up the slick into small droplets ranging in size a few micrometers to few millimetres. Chemical dispersants can do this because they contain molecules that are both water compatible and oil compatible. The molecules align themselves around the oil droplets break away from the slick. The Action prevents the coalescence (reforming or joining) of oil droplets. So, the oil can no longer form slick on water surface, and it reduces the adherence of the oil to solid particles ( sand ) and hard surfaces ( sea walls & boat hulls )Chemical dispersants remove the oil from the surface of the water and into the water column. Once in the water column, the oil is diluted to less harmful levels, and eventually is used as a food by bacteria. By removing the oil from the water surface, birds, marine mammals and sensitive coast is protected. Common Name Oil Spill Dispersant, Type-III Product Code STAN-CLC060 Features and Benefits With the break up of the oil into water wetted droplets, the continuity of the fire is disrupted and it also stops any further spread of oil fire. The mixture of Stanrose® Seacare OSD-III and water is non flammable and non hazardous. Stanrose® Seacare OSD is free from Paraffinic Solvents / Polvaromatic and Aromatic Hydrocarbons, Chlorinated Hydrocarbons, Heavy Metals, Benzene, Phenols, Caustic Alkali and free Mineral Acid. Stanrose® Seacare OSD-III is duly tested by National Institute of Oceanography ( NIO, Goa ) Stanrose® Seacare OSD-III is Type III Water base dilutable concentrate which is non corrosive, non hydrocarbon, completely bio-degradable and practically non toxic in dilute form and slight toxic in concentrate form. It mixes well in sea and fresh water where maximum efficiency achieved at 1 : 10 DOR ( Dispersant to Oil Ratio ) in fresh and sea water and in concentrate as well as in dilute form. Stanrose® Seacare OSD-III is more efficient and stable in Diluted form indicating that DILUTION ( in Portable Water ) 1 : 10 ( 1 part of Concentrate & 10 parts of Portable Water ) does not make it less effective & dilutable concentrate increases the effective spraying time, So Stanrose® Seacare OSD-III is highly COST EFFECTIVE. Technical Properties Colour Golden Yellow transparent liquid Odour Free from offensive odor pH 7.2 + 0.5 Solubility in water Soluble in water Specific Gravity at 25°C + 1°C Pour Point - 5°C Conductivity 126.TDS./150 micromhos / cm Viscosity 111.08 cSt. Flash Point Material boils in the cup without flashing at 1000C Spreading coefficient 34 dy/cm2 Toxicity, LC50 Independent results available on request. Efficiency Independent results available onl request. Stability Independent results available on request. Shelf Life 5 years. Recommended Uses Refer technical data sheet Method of Application Refer technical data sheet Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Alky Control This liquid additive is a hydroxide alkalinity builder and sludge conditioner designed to increase alkalinity in conjunction with other steam boiler treatments. It enhances the corrosion inhibition and improves the properties of other boiler water products by helping to stabilize the pH within a boiler. It can be used on a "one-shot" application basis, or with an automated continuous feed system, and is safe to use with other boiler treatment chemicals. Common Name Alkalinity Control Product Code STAN-BWT147 Features and Benefits Enhances the alkalinity and the corrosion inhibiting properties of our other boiler treat products. Completely soluble in both hard and soft water boiler system. Helps to stabilize the pH within a boiler. Convenient ready to use liquid. Can be mixed with most treatment chemicals. No carbon dioxide releases as with soda ash. Technical Properties Form - Colourless Liquid Fragrance - Characteristic Sp. Gravity - 1.25 Flash Point - None pH Value - 13.0 - 14.0 Recommended Uses It is used in controlled amounts so as to maintain a phenolphthalein alkalinity in boiler water in the range of 300 to 500 ppm as calcium carbonate. Alkalinity control ranges will vary depending upon boiler operating pressure. Method of Application “Stanrose® Alky Control " can be fed either intermittently to the boiler feed water line or with a continuous feed pump to the feed water line, deaerator or boiler drum. “Stanrose® Alky Control " can be mixed in the phosphate - dispersive tank. Materials of construction of the feed equipment are not critical, but dissimilar materials should be avoided. Steel valves should be used in place of brass. Storage and Handling Keep container closed not in use. “Stanrose® Alky Control " contains strong alkali and will cause burns. Avoid contact with skin or clothing. Wash with large quantities of water in case of contact with eyes treat with large volumes of cold water for 15 minutes and see a physician. When handling use goggels or face shield, rubber gloves etc. Keep from freezing. Store inside. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® BETA – HD Nuclear DC Chemical BETA – HD Nuclear DC Chemical is a heavy duty cleaner mainly designed for cleaning of nuclear contamination. It provides excellent result for degreasing of oil, soil, grease etc. It is very effective for decontamination of nuclear contaminated equipments, nuclear contaminated cloths, tools, floors, glass, wall etc. It is non flammable, bio degradable, non toxic, colorless, low foam, eco friendly, stable liquid advisable for cleaning of even very heavy contamination. Recommended for nuclear, pharma, chemical, textile industries. Common Name Nuclear Cleaning and Decontamination Liquid Product Code STAN-CLC 101 Features and Benefits Non corrosive & Eco friendly, Biodegradable Liquid, Completely soluble in water Technical Properties Appearance Colorless Liquid, Odour Characteristic smell, Solubility soluble in water, Viscosity(cP or mPas@200C) 42 cp, Density 0.98 g/cm^3, Flash Point Not applicable as it is aqua system Recommended Uses Nuclear Cleaning and Decontamination Method of Application ​ Storage and Handling ​ Packing Available 25 Ltr. Download File