Search Results

Stanrose®Carbon Remover It is a non-corrosive, powerful micro emulsion based cleaner for removal of carbonaceous deposits. It contains no chlorinated solvents or phenolic compounds and has low toxicity to the environment and to persons handling it. Common Name Carbon Remover Product Code STAN-ERD486 Features and Benefits High performance carbon remover for cleaning of carbon deposits (char) from burner edges, fuel injectors. Appearance: Dark brown to black liquid, with unpleasant odour, insoluble in water Quickly dissolves deposits containing carbon, resins or varnishes Eliminates need for hard scraping Non flammable Technical Properties Appearance - Clear brown Density [g/ml] - 1.0 Flash Point [°C] - Above 61 Form - Liquid Recommended Uses Removes carbon type deposits from burner tips, fuel injectors and all components fouled by carbon, resin or varnishes Cleans oil side of fuel heaters, oil coolers, etc. Removes carbon based deposits from fuel and lube oil filters Can be used for cleaning of: - Pistons - Piston rings - Valve cages Method of Application Using a brush, apply a small quantity directly onto the surface of the burner/ inject or immerse the machine into the product for 5-10 minutes, let a few minutes for the product to act and rinse with plenty of water. Use product undiluted. Storage and Handling The product is toxic, causes burnings and irritates the respiratory system. Use only in well-ventilated areas. Do not breathe fumes. Vapours inhalation may cause drowsiness and dizziness. Wear suitable protective clothing, goggles, gloves and respiratory equipment with type A or AX filter. Store in a cool dry area away from direct sunlight and ignition sources in tightly closed containers. Store separately from food items. Ensure that the workplace is well-ventilated. Packing Available Available in 1 kg, 5 kg canisters and in 25 kg plastic container. Download File

Stanrose® Tolune Toluene is a fragrant compound of hydrogen and carbon (hydrocarbon), it is clear in colour with an odour similar to paint thinners, probably because most paint thinners contain Toluene around 30%. Common Name Tolune Product Code STAN-SST209 Features and Benefits Toluene is a noxious water-insoluble chemical, but trace amounts can still dissolve in water. It is miscible with alcohol, chloroform, ether, acetone, glacial acetic acid and carbon disulfide. Technical Properties Appearance : colourless liquid Molecular Formula : C7H8 or C6H5CH3 Molar Mass : 92.14 g/mol Density : 0.8669 g/mL (20 °C) Melting Point : −93 °C, 180 K Boiling Point : 110.6 °C, 383.8 K Solubility in water 0.47 g/L (20–25 °C) Refractive index (nD) 1.497 (20 °C) Viscosity 0.590 cP at 20 °C Refer technical data sheet for more information Recommended Uses Toluene is a common solvent used for dissolving paints, silicone sealants, lacquers, gums and resins, an ingredient in coatings, aviation gasoline, perfumes, spray and wall paints, dyes, cleaning agents, paint thinner, detergents, isinfectants, plastic drink bottles, inks, adhesives, nail polish, spot removers, rubber, polyurethanes, anti-freeze, pharmaceutical medicines, nylon, is an unrefined ingredient for toluene diisocyanate (which is used to make polyurethane foam), Trinitrotoluene (TNT), and common household items, it can be used like a glue to bond together polystyrene by fusing it together the advantage being that it’s finer than an adhesive. Method of Application Toluene is also used in some processes such as leather tanning and printing, as well as in the extraction of various principles from plants. Toluene is capable of dissolving sulphur and other significant inorganic chemicals as well as being an important inorganic solvent. Toluene has been used in nuclear reactor system loops in sodium cold traps as a coolant due to its ability to perform well at transferring heat. Storage and Handling Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Anti-Fouling Stanrose® Anti-Fouling is a very effective clear , yellowish green with anti fungal based dispersing cleaner for the control of fouling by marine growth such as algae, shellfish, mussels, barnacles and micro-organisms and fungal growth in the sea water side of cooling systems. Due to its molecular firm foaming properties, it also acts as a corrosion inhibitor. Common Name Fouling Preventing Liquid Product Code STAN-CLC120 Features and Benefits Antifouling Liquid reduces the risk of Legionella Pneumophilla bacteria by effectively removing biofilms in the water supply system. When used in sterilizers and autoclaves, the reagent provides clean and shiny surfaces near the loaded glass containers, by emulsifying fats, oils, proteins and other organic residues. Effectively control micro-organism growth. Economical , reduce down time cost , also doesn't require any special monitoring. Also control biological corrosion. Technical Properties Appearance - Clear or slightly turbid aqueous solution Colorless or slightly yellow in color Density (kg / m 3 ) - 1020 pH - 8.5 - 12.5 Flash Point - None Freezing Point - <+ 2 0 C Solubility in Water - Cpmpletely soluble in water Recommended Uses It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of micro-organism, bacteria , fungi , larvae etc. The best point of feeding is as early as possible in the system , preferably at the suction point of strainer , this will helps dispersion of solution in all parts of the sea water cooling system. Method of Application For sea water cooling systems - Dose 150 – 500 ML of Stanrose® Anti-Fouling for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally the treatment is not required when sailing deep sea. For ballast tanks - Dose 1 litre of Stanrose® Anti-Fouling per 10 tons of water prior to ballasting, followed by a monthly dose of 2 litres per 100 tons. For Trim Tanks, Oil Rig Sea Legs and Similar Systems - Dose 25 litres of Stanrose® Anti-Fouling per 100 tons of water. General Testing for bacteria can be done with our Stanrose® Dip Slide Method ( Designed to check and see anytime anywhere invisible danger Bacteria / fungus grow from Cooling / Drinking water ) which indicate the extent of the bacteriological contamination. Note: 1 . Strictly avoid to contamination / use in any food area / farming purpose 2 . It is strongly recommended to clean entire fouled contaminated system prior to its use. 3. It should be diluted with fresh water. 4. Causes eye and skin irritation, workers must wear all chemical resistant apron and face mask, long pants, shoes. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Deflame Electrosolv Stanrose® Deflame Electrosolv is a fast evaporating cleaner that leaves no residue. The product is suited for cleaning electrical and electronic devices. The product is used as an electrical contact cleaner to remove grease, dirt, oil, flux and other surface contaminants from sensitive electrical/electronics devices. Stanrose® Deflame Electrosolv can also be used to clean motorized instruments, control panels, electrically driven equipment, motors and other electronic devices requiring non-flammable, low residue degreasing agents. Common Name Non Flammable Electric Cleaner Product Code STAN-CLC083 Features and Benefits Stanrose® Deflame Electrosolv can also be used to clean motorized instruments, control panels, electrically driven equipment, motors and other electronic devices requiring non-flammable, low residue degreasing agents. Technical Properties Technology Solvent cleaner Chemical Type Halogenated Solvent Appearance Clear water-whiteLMS Viscosity Very low Application Cleaning of electrical / electronics devices This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected with a sealant for chlorine or other strong oxidizing materials. Recommended Uses The product is used as an electrical contact cleaner to remove grease, dirt, oil, flux and other surface contaminants from sensitive electrical/electronics devices. Method of Application 1. Hold can 15 to 20 cm () from surface to be cleaned. 2. Spray surfaces liberally. Extension tube can be used to pinpoint application. 3. Allow Stanrose® Deflame Electrosolv to fully evaporate from parts prior to bonding to avoid solvent entrapment within the bond joint. Storage and Handling The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Stanrose cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Biostan Oil Cleaner "Stanrose® Biostan Oil Cleaner" is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegetable oils, fish oils, tall oils, tug oils etc .It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents, Biodegradable minimizes the extreme hazards to personnel in handling materials. Common Name CTC Volc Cleaner Product Code STAN-CLC069 Features and Benefits Removes grease, oil, carbon deposits, soil and grime. Keeps loosened deposits in suspension preventing re-deposition. Low toxic. , Non-flammable. Free from hydrocarbon solvents. Effective and economical in use , Water-based cleaner. Technical Properties Appearance Slightly Yellow Viscous Ordour Characterisric Density 1.00 at 20°C Flash Point None pH 7 at 20°C pH Neat None on Cement, Ceramic Tiles, Vinyl or Metal Surfaces Recommended Uses It is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegetable oils, fish oils, tall oils, tug oils etc Method of Application First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using "Stanrose® Biostan Oil Cleaner" is by direct injection followed by re-circulation washing, using tank cleaning machines. Spraying Method : Using "Stanrose® Biostan Oil Cleaner" as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry. **Make sure to take all safety precautions are followed when handling / spraying "Stanrose® Biostan Oil Cleaner"** Injection Method : Not applicable. Re- Circulation Method : Fill tank with fresh water and heat up to warm 50o C . If a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and "Stanrose® Biostan Oil Cleaner" to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. **Use a strainer at the pump stack when circulating any solution.** Tank Lining– Stainless / Epoxy / Phenolic. Dosage : Necessary concentration in water only 0,2 to 0,4 % Storage and Handling Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Aqua Degreaser "STANROSE® AQUA DEGREASER" is mixture of Emulsifier, new technology surfactants (With high solvency and emulsification effect), Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas. Acts as superior quality cleaner / degreaser. "STANROSE® AQUA DEGREASER" containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper, Brass and Tin. "STANROSE® AQUA DEGREASER" is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing may be applied by brush, hand spray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be Removed. Common Name Aqua Break Product Code STAN-CLC068 Features and Benefits Compa􀆟ble with oily water separators. Releasing the oil phase for reclama􀆟on. Suitable for all types of floors. Deodorizing nature Eliminates the need to buy & stock duplicate products due to its effec􀆟veness. An economic highly concentrated product. Also used for gas and hydrocarbon freeing of tanks. Free from caus􀆟c & hydrocarbon , Non flammable. Water based , Biodegradable. Safe to metal Technical Properties Colour - Yellow Appearance - Clear Liquid Odour - None / Infinite in water Density - g/cm3 at 15°C: 1.0 +/- 0.05 Metal Compatibility @ 25°C: 0.850 – 0.860 Rubber Compatibility @ 20°C: 1.469 – 1.472 pH Neat 10-11 Recommended Uses Tank Cleaning : Cargo tank cleaning after mineral, animal, vegetable and fish oil. Method of Application 1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water. May be brushed on, sprayed (Hand spray/Direct injection) re-circulate the system with "STANROSE® AQUA DEGREASER" Solution 1. Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%). 2. Cleaning with re-circulation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%). 3. Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before washing off. "STANROSE® AQUA DEGREASER" has a de-odorizing nature. and is not flammable. Doses : Nature of Residue | Hand Spray | Direct Injection | Circulation Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines) | 1 - 10% | 0.03-0.5 % | 0.05-0.7 % Organic Material (Hydrocarbon) | Not Available | 0.0 5-0.5 % | 0.05-0.7 % Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® AC Cleaner “Stanrose® AC Cleaner” is a powerful solvent emulsion cleaner for the cleaning of diesel engine air coolers, scavenging air systems and compressor sides of turbochargers. Common Name Air Cooler Cleaner Product Code STAN-CLC078 Features and Benefits Formulated to remove oil, grease and carbon deposits from air coolers and scavenging systems Efficient and economical. May be used for in-service cleaning. Renders surfaces oil-repellent. Maintains and stabilises air cooler efficiency at maximum. Saves time, maintenance costs and avoids risks of damage when dismantling. Leaves no residue and has no harmful effect on engine. Product in water solution is non-flammable, non-explosive and has no flash point. Can be used for light carbon removal from machinery parts. Technical Properties Form - Liquid Appearance - Light Yellow Density - 1.1 Flash Point - Above 610 C Compatible - May swell rubber and synthetic rubber Recommended Uses This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships. Method of Application In-service cleaning : The general principle is to inject a solution of “STANROSE® AC CLEANER” into the air trunking upstream of the charge air cooler, followed by a clean water rinse. For efficient cleaning of air coolers, it is necessary to use correctly installed dosing and injection equipment. To calculate the amount of solution required to clean an air cooler, calculate or find the crosssectional area of the cooler and use 3 litres of cleaning solution per square metre or as table below: Engine HP to Solution mix. with 25% Air Cooler Cleaner 6,000 to 12,000 3 litre mix 12,000 to 24,000 4.5 litre mix 24,000 or more 6 litre mix For in-service cleaning of the air cooler and air-side of turbochargers, a solution of 25% Air Cooler Cleaner in freshwater is recommended.The appropriate dose of cleaner is then put in the dosing pot and injected up-stream of the air cooler in 10 minutes. After a further 10 minutes, a similar quantity of fresh water is injected to rinse off the emulsified deposits. Rate and frequency of application depends mainly on the condition of the air coolers. However, when starting with the use of “STANROSE® AC CLEANER”, we recommend injection every 24 hours. After initial cleaning period, the cleaning effect should last for 48 hours of operational time. Although frequency of cleaning may vary, the calculated cleaning dose should remain the same. This cleaning method is only recommended if approved by engine manufacturers. Out of Service Cleaning : Hand Spray Cleaning In this situation the engine must be stopped. Open an appropriate air trunking inspection cover. Open air cooler drain valves. Using a pressure hand Spray, apply undiluted Air Cooler Cleaner all over the cooler coils. Allow the “STANROSE® AC CLEANER” to penetrate the deposits for a minimum of 1 hour, then use a high pressure lance or water jet to wash off the loosened deposits. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains. Soak Method This method may be used for machine parts with stubborn carbon deposits. Put parts to be cleaned into a bath of undiluted “STANROSE® AC CLEANER” and allow deposits to be broken down and loosened before removal, then rinse. Stanair Cool – 2010 Injection System The engine manufacturer should be consulted before installing injectors. Large engines will normally require two injectors per cooler, but one injector is usually sufficient for medium and small engines. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Alkaline Cleaner HD Stanrose® Alkaline Cleaner HD is a high performance, heavy duty alkaline cleaner and detergent available in a liquid concentrate form. It is scientifically formulated for use in soak tanks, high pressure washers, automated scrubbing machines as well as for manual application. Stanrose® Alkaline Cleaner HD is specially formulated from a blend of soaps, synthetic detergent, solvents and inorganic alkaline builders and comes in a highly concentrated form. This product is an extremely versatile heavy duty industrial cleaner developed specifically for use in automated scrubbing machines, high pressure washers, soak tanks as well as for manual use. Common Name Heavy Duty Alkaline Cleaner Product Code STAN-CLC055 Features and Benefits Highly efficient heavy duty cleaner Highly concentrated Use in soak tanks, high pressure washers, automated scrubbing machines, manual use Technical Properties Form - Liquid Specific Gravity - 0.79 Appearance - Colourless Flash Point - 40°C Odour - Hydrocarbon Auto Ignition Temp - 225°C Recommended Uses Use in automated scrubbing machines, high pressure washers, soak tanks as well as for manual use. Method of Application Generally concentrations between 0.5% and 5% by volume are suggested depending on severity of soiling. Always thoroughly rinse after cleaning. Important - Do NOT use on aluminium or galvanised articles. It is always advisable to carry out a 'Control of Substances Hazardous to Health' (COSHH) assessment before use. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxalwash Stanrose® Oxalwash is a 100% super concentrated powder so you can safely dilute it to suit your cleaning task. It is a much safer option than most other acids used in cleaning including Hydrochloric and Hydrofluoric Acid. Common Name Oxalic Based Metal Body Cleaner Product Code STAN-CLC114 Features and Benefits Removes Rust, Iron Stains, Tannins, Scale and other Mineral Stains Suitable for Laundries & Specialty Stain Removal Applications Readily Biodegradable - Naturally occurring organic acid Technical Properties Phosphate free Septic safe Grey water safe A safer alternative Recommended Uses Stanrose® Oxalwash is used by many different industries for many different applications. Exterior timber deep cleaning and preparation Commercial Laundries - Rust and mineral deposit remover on fabric Building & Construction Cleaning - Mineral staining, grout, mortar, bricks, tiles, pavers. Professional Carpet Cleaning - Rust and mineral stain removal. Rust, scale and water mark removal from baths, basins and other washroom surfaces. Hard wood stain removal on concrete and carpet Method of Application Read SDS and PIS before use Do not mix with other chemicals including laundry powders and liquids Always wear suitable gloves, body and eye protection ALWAYS TEST FIRST - Because all surfaces are different, we always recommend that you perform a small test patch in an inconspicuous area to ensure the products suitability to the surface and your expectations will be met. Timber Instructions 1. Test first 2. Dilute 125-250g of Stanrose® Oxalwash into 5 litres of water. (Some timber applications may require higher concentrations) 3. Apply to surface with broom, brush, scourer or doodle bug. 4. Scrub with brush (medium to hard bristles) or doodle bug scourer and let dwell on surface for 5 to 10 minutes not allowing the surface to dry. 5. Remove and rinse thoroughly 6. Repeat process if required. Increase the amount of Stanrose® Oxalwash added to the water where necessary and start by testing first again. Building & Construction Instructions 1. Test first 2. Dilute 125-250g of Stanrose® Oxalwash into 5 litres of water. 3. Apply to surface with broom, brush, scourer or doodle bug. 4. Scrub with a suitable agitation method (ie. scourer, brush, machine, doodle bug) and let dwell on surface for 5 to 10 minutes not allowing the surface to dry. 5. Remove and rinse thoroughly 6. Repeat process if required. Increase the amount of Stanrose® Oxalwash added to the water where necessary and start by testing first again. Professional Carpet Cleaning Instructions 1. Test on a small inconspicuous area first to ensure suitability of this product on the surface. 2. Remove any debris or excess stain deposits 3. Dilute 50g of Stanrose® Oxalwash into 2 litres of water. You can make a weaker solution for less severe staining. 4. Spray or pour onto the fibre or fabric until wetted out. Do not over wet. Agitate gently if required. 5. Allow to stand for at least 5 minutes and for more stubborn stains allow 10-20 minutes dwell time. 6. Rinse & Extract with diluted pH neutral carpet/upholstery pre-spray and machine. For best results add ‘Plush – Carpet and Upholstery Rinse, Softener & Cleaner’ to your water in your machines solution tank. (If a machine is unavailable you can blot away with a damp clean white towel and then neutralise with Houdini Multi Task Spotter or Aussie Encappa diluted at 1:4. Blot away again with another damp white towel to remove all chemical and stain residue.) 7. Allow to dry. (You can assist drying by ensuring good ventilation and using an air mover) 8. Repeat process if necessary. Tips for use on carpet: Do not overwet carpet or upholstery with diluted solution. Attend to spots and spills as soon as possible. Fresh spots are significantly easier to remove. Stains that are left too long or treated with the wrong chemical can become permanent. Always do your stain removal working from the outside of larger stains to the inside. This prevents the stain from spreading. Laundry Instructions To remove rust and iron stains from laundry add 100-200g of Oxalic Acid to the hot pre-soak water. These quantities may be varied for different amounts of laundry to be soaked. Oxalic Acid can be used on fabrics including cottons, poly cottons, silk and wool. Oxalic Acid is recommended for specialty stain removal when laundering all types of linen including uniforms. Important 1. Do not use this product before reading and understanding the safety data sheet and Product Information Sheet. 2. Always wear personal protection equipment (refer to MSDS) 3. Oxalic Acid has the ability to dull or etch polished (shiny) natural stone surfaces. 4. Oxalic Acid is classified as hazardous under the criteria of Worksafe India. 5. Always pre-test in an inconspicuous area to ensure suitability before using this product. 6. Do not mix with any other chemicals 7. Some staining is permanent and can not be removed with a chemical. Replacement or restoration of surfaces may be required. Storage and Handling Avoid contact with skin and eyes. Avoid breathing vapour. See separate Safety Data Sheet available on request for more information. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Oxycontrol-H When operating modern boiler facilities even under ideal conditions, trace quantities of oxygen are left in the feed water despite mechanical de-aeration. Common Name Oxycontrol-H Product Code STAN-BWT149 Features and Benefits "Stanrose® Oxycontrol-H" is a liquid and easy to feed. It will convert ferric oxide to a protective film of magnetic. Single colourimeteric control test. It doesn't contribute dissolved solids to the boiler water. Reduced blow-down costs. Makes iron oxide sludge non adherent by completely changing its composition. Technical Properties Feed solutions should be prepared with a minimum of stirring. Approx. 6.5 parts of "Stanrose® Oxycontrol-H" are required to chemically react with one part of dissolved oxygen. When using "Stanrose® Oxycontrol-H" in a system for the first time, dosage requirements will be much higher due to the consumption of "Stanrose® Oxycontrol-H" by the ferric oxide present. Because of the reaction of "Stanrose® Oxycontrol-H" with air, feed solutions should be made up fresh daily. Recommended Uses "Stanrose® Oxycontrol-H" will chemically react with active oxygen to form inactive gases of nitrogen and water. Additionally "Stanrose® Oxycontrol-H" passivates metal surfaces through the formation of protective oxide films thereby minimizing iron and copper deposits in the boiler. Method of Application "Stanrose® Oxycontrol-H" should be fed continuously for best results. A positive displacement pump should be used to feed "Stanrose® Oxycontrol-H" into feed water after the deareator. Continuos feed to this area will supply continuos corrosion protection to the feed water control. "Stanrose® Oxycontrol-H" is controlled by checking the feed hydrazine residual in the boiler water. The recommended range is 0.1 - 0.2ppm. Control testing is a simple colourimeteric cooperator which is available from Stanrose. Storage and Handling Avoid contact with skin and eyes. Avoid breathing vapour. See separate Safety Data Sheet available on request for more information. Store in a dry place, keep container closed when not in use. Avoid contact with skin. Wash with large quantities of water. In case of contact with eyes, treat with large volumes of water and see a physician. Avoid contact with eyes and skin. In case of contact rinse with plenty of water. Wear suitable protective clothing, gloves and eye/face protection. Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. "Stanrose® Oxycontrol-H" is harmful if swallowed. Skin contact and vapour inhalation should be avoided. Protective equipment should be worn when handling "Stanrose® Oxycontrol-H". "Stanrose® Oxycontrol-H" does not have a flash or fire point and does not represent a fire hazard. Direct contact and storage in high temperature areas should be avoided. Keep container closed when not in use. Do not store near acids or oxidising agent. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® 3-in-1 Rust Cleaner Stanrose® 3-in-1 Rust Cleaner is an incredibly versatile product which acts as a light duty lubricant, penetrant/release agent, dewatering fluid and corrosion preventative. Stanrose® 3-in-1 Rust Cleaner contains a blend of cleaning solvents to wash away residues of oil and grease, dispelling water and allowing deep penetration into threads and mechanisms. A combination of mineral oils and oxidised waxes provide lubrication and unrivalled corrosion protection. In aggressive accelerated salt spray tests Stanrose® 3-in-1 Rust Cleaner has been shown to provide up to 3 times the protection of rival products. Common Name High quality 3 in 1 corrosion preventive, moisture displacer and light lubricant Product Code ​ Features and Benefits Versatile and effective non sticky light duty lubricant. Penetrates and releases corroded components, nuts and bolts. Non conductive Displaces water from wet components, switches, motors and ignition systems. Protects electrical contacts from corrosion. Contains oxidised waxes and corrosion preventatives. Protects components, mechanisms and equipment from corrosion during storage and following aqueous cleaning. In accelerated corrosion testing Stanrose® 3-in-1 Rust Cleaner provided up to 100 hours salt spray resistance. Solvent cleaning action flushes away residues of old oil and grease. Safe for use on ferrous and nonferrous metals. Technical Properties TECHNICAL DATA (for bulk liquid) APPEARANCE - Liquid COLOUR - Brown ODOUR - Hydrocarbon Solvent SPECIFIC GRAVITY - 0.80 VOC CONTENT - 644g/l SOLUBILITY - Insoluble in water SALT SPRAY - Up to 100 hours BOILING POINT (°C) - 155 FLASH POINT (°C) - 43 P/M Pensky-Martens. VISCOSITY - 3 cps @ 20°C SURFACE TENSION - 20 mN/m @ 20°C TECHNICAL DATA (aerosol) APPEARANCE - Aerosol PROPELLANT - Hydrocarbon Recommended Uses Release of tightly corroded components, nuts and bolts during maintenance and repair. Routine lubrication of mechanisms switches and contacts during maintenance. Displacement of water from electrical and ignition systems. Protection of components, machined surfaces and equipment from corrosion during storage or transit. Protection of manufactured items in production environments to prevent corrosion, aid assembly and ensure items remain in original condition following storage. Method of Application When applying to electrical components and switches ensure power is switched off prior to application and allow to drain and air dry fully before reconnection. Stanrose® 3-in-1 Rust Cleaner may be applied by spraying onto and around the component. For release of nuts and bolts allow a short contact time following application to ensure total penetration. It is often better to tighten nuts slightly to crack the rust prior to unwinding. Stanrose® 3-in-1 Rust Cleaner may also be used for immersion of components in trays or deep tanks. This is particularly effective when using Stanrose® 3-in-1 Rust Cleaner as a corrosion preventative in production situations. Storage and Handling Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated. Store at moderate temperatures in dry, well-ventilated area. Flammable liquid storage. Health and Safety Data sheet available separately. Packing Available 25 Ltr. / 210 Ltr. Download File

Stanrose® Paint Remover A fluffy, thick jelly like stripping compound based on non-flammable solvents, to soften, dissolve and remove dry old paint layers. It can remove air drying alkyd paints, stoving paints and water based paints effectively. It can also remove two component polyurethane, epoxy and other coatings with applications in extended times. It has good penetration properties and allows quick removal of paint without any considerable damage to the substrate. Common Name Paint Remover Product Code STAN-CLC088 Features and Benefits Highly effective, ready for use type, easy to apply, useful for various types of old coatings removal. Technical Properties APPEARANCE Fluffy thick jelly liquid / Hazy SPREADING RATE The spreading rate required to remove the coatings, depends on various factors like type of coating, thickness of coating and substrate etc. SPECIAL PRECAUTION Use protective hand gloves, goggles, solvent masks etc. while using Paint Remover. In case of any accidental skin contact, wash with plenty of fresh water. Keep away from reach of children. FLASH POINT Not applicable SOFTENING TIME 15 – 20 minutes Recommended Uses National Paint Remover is recommended for removing various hard and dry coatings like Syn. Enamels, Stoving Enamels, NC, Water based Coatings etc. It can be applied on coatings over metal, concrete, plaster, glass etc. It is recommend to use without any dilution. Method of Application SURFACE PREPARATION Before application, check the nature of the surface. Application can be done by the recommended application method. APPLICATION METHOD Brush, Roller, Scraper CLEANING/THINNING National GP Thinner THINNER (VOLUME) Ready for use RECOMMENDED METHOD OF USE Apply thick coat of National Paint Remover on the required coating surface to be removed. Allow to soak the film for 10 – 15 minutes, during this time paint film will start to delaminate from the substrate. The delaminated, soaked film along with excess chemical,if any, can be removed with scraper. If the film is more thick and hard, it may be necessary to repeat the process more than once. After complete removal of paint, clean the surface properly to remove completely any traces of chemicals remains on the surface. Storage and Handling 18 months, in original sealed container, with proper storage conditions. As a general rule, avoid skin and eye contact by wearing overalls, gloves, goggles, and airmask etc. Spillage on skin should immediately be removed by thorough washing with water and soap or suitable cleaner. Eye should be flushed with fresh water. Avoid inhalation of vapours and paint mist by wearing suitable airmask. In the event of ingestion and eye contact, seek medical attention immediately. Painting must be carried out in wellventilated area. This as industrial product contains corrosive materials and is hazardous. It should be used with adequate precautions. Smoking in the area should not be permitted. Local safety regulations should be followed. Store the paint remover in proper storage conditions as per the local regulations. Keep the paint remover container in sealed condition under shed in a cool area, away from direct sunlight and extreme temperatures. Do not stock paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied material, to avoid contamination. Handle with care. Do not stir the material. Before application soft mixing is recommended. Always keep in recommended plastic cans. This product contains corrosive materials and is hazardous. It should be handled with care. Keep away from the reach of children. Packing Available 25 Ltr. / 210 Ltr. Download File